No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Muli-hop BFD session failure with juniper router

Publication Date:  2014-04-30 Views:  1061 Downloads:  0
Issue Description
The session can't turn up when configured Multi-hop BFD with cisco of S5700.
Alarm Information
null
Handling Process
configured the port number as 4784 manually to setup the BFD sessions on S5700.
Root Cause
1. RFC defined one-hop BFD session’s  TTL should be 254.  And Huawei device use TTL 253 as the multi-hop BFD session’s port. And we believe that most company’s device use the same port for multi-hop BFD sessions.
2、 We  configured multi-hop BFS session as auto mode , that means our device will automatically learn the port of the remote equipment by default. But juniper didn’t  handle the packets with the port as 3784 and without sending us the reply packets. So that our device couldn’t  learn port 4784. And the reason is that when our company developed BFD sessions RFC didn’t finish the standard documentation yet.
Suggestions
null

END