eSpace UC Configuration Cases

Publication Date:2016-05-13 Views:1512 Downloads: 320 Document No.: DOC1000020306 Description:
Contents

00-1 Title Page

00-2 About This Document

00-3 Contents

01-01 Configuring the Single-Node Network

01-02 Configuring the Multi-Node Centralized Call Management Network

01-03 Configuring the eSpace U1980s Deployed in Active Standby Mode

01-04 Interoperability Configration between Unified Gateway and Cisco UCM

01-05 Interoperability Configration between Unified Gateway and Avaya IPT

01-06 Interoperability Configuration Between Unified Gateway and RADIUS

01-07 Interoperability Configuration Between eSpace U1981 and the IMS

01-08 Interoperability Configuration Between the eSpace UC and the Telepresence System

01-09 Configuring User Sections

01-10 Configuring the Fax Service

01-11 Configuring Time Synchronization

01-12 Configuring Local Languages

01-13 Configuring Toll Fraud Prevention

01-14 Configuration for DDI Incoming and Outgoing Calls Through the IAD FXO Interface

01-15 Configuration for DDI Incoming and Outgoing Calls Through the AT0 Trunk

01-16 Configuration for Long Numbers and Short Numbers

01-17 Configuration for Intelligent Routes

01-18 Configuration for the Scenario of Multiple Secretaries for Multiple Managers

01-19 Configuring Outgoing Call Routing Through the AT0 Trunk

01-20 Configuring Outgoing Call Routing Through the PRA Trunk

01-21 Dual Registration of IP Phones (with DNS Deployed)

01-22 Dual Registration of IP Phones (with SBC Deployed)

01-23 IP Phone Deployment Using eSight

01-24 IP Phone Configuration Using DHCP Option 246 (Recommended When Asterisk or BroadSoft is Used)

01-25 IP Phone Deployment Using DMS (Recommended When the Core Network IMS Is Used)

01-26 Interoperability Configuration Between eSpace 7900 Series IP Phones and Asterisk

Related Documents