OceanStor 18500 V3&18800 V3 Mission Critical Storage System V300R003 Parts Replacement 10

This document describes the procedure for replacing the parts of storage system in terms of safety operations, preparations, and precautions.
Rate and give feedback :
Чтобы помочь вам лучше понять содержимое этого документа, компания Huawei перевела его на разные языки, используя машинный перевод, отредактированный людьми. Примечание: даже самые передовые программы машинного перевода не могут обеспечить качество на уровне перевода, выполненного профессиональным переводчиком. Компания Huawei не несет ответственность за точность перевода и рекомендует ознакомиться с документом на английском языке (по ссылке, которая была предоставлена ранее).
About This Document

About This Document

Introduction

This document provides the process and methods of replacing OceanStor 18500 V3/18800 V3 storage system parts.

To check software and hardware status, ensuring success replacement of the parts, it is recommended for you to use OceanStor Toolkit (embeded in the SVP) to guide your parts replacement.

Intended Audience

This document is intended for:

  • Technical support engineers
  • Maintenance engineers

Symbol Conventions

The symbols that may be found in this document are defined as follows:

Symbol

Description

Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results.

NOTICE is used to address practices not related to personal injury.

Calls attention to important information, best practices and tips.

NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration.

Change History

Changes between document issues are cumulative. The latest document issue contains all the changes made in earlier issues.

Issue 10 (2018-05-30)

This issue is the tenth official release.

Rectified some description of replacing a controller.

Issue 09 (2018-02-05)

This issue is the ninth official release.

Rectified some description of replacing a controller.

Issue 08 (2017-11-30)

This issue is the eighth official release.

Optimized the description of the 8 Gbit/s Fibre Channel Interface Module (Eight Ports).

Issue 07 (2017-07-20)

This issue is the seventh official release.

Added the procedure for removing/inserting the power cables.

Issue 06 (2017-03-27)

This issue is the sixth official release.

Added the description of Replacing a Mini SAS HD Cable and Identifying Host Services Running on the System Enclosure.

Issue 05 (2016-11-20)

This issue is the fifth official release.

Added the description of how to obtain spare parts.

Issue 04 (2016-07-25)

This issue is the fourth official release.

Added the description of Replacing an 8 Gbit/s Fibre Channel Interface Module (Eight Ports) and Replacing an MPO-4*DLC Optical Fiber.

Issue 03 (2016-04-30)

This issue is the third official release.

Added the description of how to replace an assistant cooling unit.

Issue 02 (2015-12-10)

This issue is the second official release.

Added the description of how to check the replacement.

Issue 01 (2015-08-30)

This issue is the first official release.

Перевод
简体中文
Загрузить
Updated: 2018-06-05

№ документа:EDOC1000084105

Просмотры:2858

Загрузки: 125

Average rating:
Связанные документы
Share
Назад Далее