Q: Why MA5200F MA2.10-7123 and the later versions do not have connection-limit for users
This is related to version. In versions lather than 7123, they have both normal and simple modes.
On the basis of simplifying the functionalities, MA2.10-71xx simple mode optimizes the performacnce of R007, but it does not support such as NAT, plug-and-play, multimedia bearer, connection-limit for users, and log for access of users. Therefore, when the simple mode is used, MA5200F does not support connection-limit for users which is supported by normal mode.
Use the following command to switch over simple/normal mode:
STRING<1-127> File name
normal-version The normal version
simple-version The simple version
Note: It is required to reset the system after using the command.