Some site wants to adds new user at MA5200F. When adding , the system indicates "0 portvlan can be used".
%Only 0 more portvlan can be used
1. Check integrated equipment of MA5200F and it can permit the configuration of 8K portvlan at most.
2. Check present data configuration and 8K portvlan has been configured (Add VLAN under all ports, e.g. portvlan ethernet 1 vlan 1 100 means configuring 100 portvlans). Client does not configure according to actual VLAN but large VLAN segment under every port. So portvlan is greatly occupied.
3. Confirm with client. Delete unnecessary portvlan data.
From indication, the resource of portvlan is exhausted. When adding new portvlan, the system indicates "0 portvlan can be used", it fails.
Configure data according to actual situation. Otherwise the resource will be wasted or there is much rubbish data.