[USG5300]multicast interface-set set-name
//Create a static multicast interface set and go to the corresponding view
[USG5300]add interface interface-type interface-number
//Configure the member interfaces of the static multicast interface set. One static multicast interface set can contain multiple interfaces for forwarding various static multicast packets. Member interfaces of the static multicast interface set can be Ethernet interfaces or Gigabit Ethernet interfaces. The member interfaces include the ingress interfaces and egress interfaces of multicast packets.
[USG5300] multicast route-table static source 10.1.1.2 group 184.108.40.206 in-interface GigabitEthernet 1/0/0 interface-set a1 newsource 220.127.116.11
//Create static multicast routing entries. 18.104.22.168 is a usable multicast address for users, that is, temporary multicast address. It is valid on the entire network. The multicast address can be replaced by any IP address that is within the range of 22.214.171.124 to 126.96.36.199 and 188.8.131.52 to 184.108.40.206.
According to the network diagram, the customer can configure transparent transmission of multicast packets on the USG5300 by using any of the following methods:
1. Configure transparent transmission of multicast packets when the USG5300 works in transparent mode.
2. Configure transparent transmission of multicast packets when the USG5300 works in routing mode.