A Disk Insertion Alarm Is Reported Because Users Insert a Hard Disk to Expand Capacity

Publication Date:  2012-07-17 Views:  151 Downloads:  0
Issue Description
Related information about the product and version: CSS V100R001C01 Database Volume.
A hard disk is inserted by the user to expand capacity, the 0xB02090002 The disk is inserted alarm is reported.
Alarm Information
None
Handling Process






























Step 4     Run the MegaCli64 -pdinfo -physdrv[E:S] -aall command to check the status of the hard disk again, as shown in the red circle in Figure 1-4.

l   If the Firmware state is in the Unconfigured(bad) state, contact technical support engineers.

l   If the Firmware state is in the Unconfigured(good) state, the fault is removed.

----End





Root Cause
On the ISM interface, the alarm listed in Table 1-3 is reported.
Table 1-1 Disk insertion alarm
 
Alarm ID Alarm Name Alarm Cause Alarm Description
0xB02090002 The disk is inserted A disk is inserted. The disk ([slot-id]) in the device ([dev-name]) is inserted; therefore, the system capacity may be expanded; location: cloud storage domain ([domain-name]), rack ID ([rack]), frame ID ([frame]).
 A hard disk is inserted by the user to expand capacity.
Suggestions
After a hard disk is replaced, clear information about the hard disk.

END