LLDP Synchronization Fails

Publication Date:  2012-07-23 Views:  118 Downloads:  0
Issue Description
LLDP synchronization fails and the system displays an error message indicating that the length of the response packet exceeds the maximum length of SNMP packets or another SNMP error occurs.
Alarm Information
None
Handling Process
Check whether the equipment has been configured with the preceding commands.
1.         In the system view, run the display this command to view the configuration commands associated with the SNMP agent.
2.         Configure any command that has not been configured, and then perform LLDP synchronization again.
Root Cause
Data synchronization failure
When LLDP functions are used, the following commands must be configured on the NE:
snmp-agent mib-view included iso-view iso
snmp-agent community read public mib-view iso-view
snmp-agent community write private mib-view iso-view
snmp-agent packet max-size 3000(max-size can be set to a value according to requirements.)
Suggestions
None

END