FAQ-S27 & 37 & 57 series switches WEB management interface configuration method

Publication Date:  2014-09-12 Views:  402 Downloads:  0
Issue Description
None
Alarm Information
None
Handling Process
 First, configure the host and switch interoperability
1.  Created VLAN100
[Quidway] vlan 100
2.  VLAN interface 100 configured IP address
[Quidway] interface vlanif100
[Quidway-Vlan-interface100] ip address 10.1.1.132 255.255.255.0
3.  Entry the uplink port E0/24 , configure it as access port, and allow VLAN100 passing.
[Quidway] interface gigabitethernet0/0/1
[Quidwaygigabitethernet0/0/1/24] port link-type access
[Quidwaygigabitethernet0/0/1] port default vlan 100
4. Configuration PC address and the switch management address in a same segment, setting the gateway as the management address

Second, upload the WEB management file to the switch
1.  Execute the command system-view, to enter the system view.
2.  Execute commands ftp server enable, enable the FTP service.
3.  Execute the command aaa, enter the AAA view
4.  Execute command local-user user-name password {simple | cipher} password, configure the FTP user name and password.
5.  Execute the command local-user user-name ftp-directory directory, configure FTP user access path.
6.  Execute the command local-user user-name service-type ftp, configure FTP login user service type.
7. Execute the command local-user user-name privilege level 3 set permissions.
8.  In the Cmd view of the PC, Execute the command ftp ip-address, enter the user name and password to log on to the switch.
C: \> ftp 10.1.1.132
Connected to 10.1.1.132.
220 FTP service ready.
User (10.1.1.132: (none)): client
331 Password required for client.
Password:
230 User logged in.
ftp>
In the FTP view, execute the command Put local-filename upload the Web page file on the PC (for example: web.zip) to the switch.
ftp> put web.zip
200 Port command okay.
150 Opening ASCII mode data connection for web.zip.
226 Transfer complete.
ftp: send 251,047 bytes, with 3.36Seconds of 74.74Kbytes/sec.
ftp>
---- End

Third, load WEB file
Execute the command system-view, to enter the system view.
Execute the command http server load file-name, loading the Web page file.

Fourth, configure HTTP account
Execute the command system-view, enter the system view.
Step 1 Execute the command the http server enable, enable the HTTP service.
Step 2 Execute the command aaa, enter the AAA view.
Step 3 Execute the command the local-user user-name password {simple | cipher} password, configure HTTP user name and password.
Cipher form password is the best in the actual configuration, user name and password do not set too simple, in order to guarantee security.
Step 4 Execute the command local-user user-name service-type http, configure user admin access type for HTTP.
Step 5 Execute the command the local-user user-name privilege level 3, set permissions.
Step 6 Execute the command quit and return to the system view.
Step 7 (Optional) Run the http timeout timeout ,configured HTTP session time-out, the default session timeout is 30 minutes.

Five, landing WEB network management
Open Web browser on PC, enter S5300 management IP address (have a reachable route between the PC and S5300) in the address bar, press the Enter key will display the login dialog box. Input the setting Web management account and password before, enter the code and select the language of the Web NMS.
a) login interface
Before you click “login”, you can select "remember my password”, so the next time you log on to the system, enter your user name and password will automatically match with the user name.
Root Cause
None
Suggestions
None

END