A site’s PC through the Secoway VPN Clientz directly do L2TP VPN connection with the center USG2220, the client dial-up connects successful, but unable to access center network resources. Network topology: Intranet—usg2220----internet---pc
1, first check the dialing on the PC, found it has acquired the IP and mask;
2, check the LNS configuration, found the IP address of the address pool under the VT port is in the same network segment with the internal network interface;
ip address 192.168.1.1 255.255.255.0
ip pool 192.168.150 192.168.1.254
3, modify the address of address pool to: ip pool 1 184.108.40.206 220.127.116.11, the client redial, can visit the LNS internal network resources
LNS end configured address pool is in the same network segment with the internal network, there is IP address conflict when dialing, which leads to can’t access to LNS end internal network.
In L2P dialing, need to make sure the LNS address pool and any network segment of the internal network are not in the same network segment, in order to avoid to cause address conflict.