FAQ: how to quickly get the ESN information of SIG server?

Publication Date:  2012-11-22 Views:  875 Downloads:  0
Issue Description
Q: SIG server need acquire the ESN information of the SRS server when applying LICENSE, how to quickly get?
Alarm Information
None.
Handling Process
None.
Root Cause
A:
The first method:
Acquire according to the steps of the SIG site deployment instruction, this method is relatively complex, specific steps are as follows:
1, acquire the hardware information collector from the applied version software
2, Get the address of the server in which the SRS located
For the system which has been installed SIG software and in normal running, login WEB interface, through the "area and equipment management - > component running state" view SRS server’s IP address.
To the system which hasn’t installed SIG software, after configured the IP address in the server, through the “centralized installation planning tool” planning system component distribution can determine the SRS server’s IP address.
Access server’s ESN has no relationship with whether the system has installed sig software, after planned server’s components, can install SIG software after obtained ESN.
3, upload the hardware information collector to SRS server.
4, execute the following commands in “hardware_info” directory to obtain ESN number.
chmod u+x hardware_info
./hardware_info

Executive output results examples:
ESN: 8a0fca56b6a4db84b0beb1cd11fda8f8
1, Hardware_info file is unenforceable by default after uploaded to the server, before execute the script, first through execute the command “chmod u+x hardaware_info” to modify the permissions of the “hardware_info”.
2, the server obtained ESN number can't reinstall operating system or change the name of the network adapter, otherwise needs to apply for License again.
The second method:
Can acquire the ESN code of the SRS server directly from the interface after installed the SIG server.
Suggestions
None.

END