Configuration of VP9035A

Publication Date:  2012-11-27 Views:  218 Downloads:  0
Issue Description
When connect to PC and make presentation, 2 TV set go to sleep mode after each interval 10min. If using remote control, pressing any button, 2 TV return to display normally.
Alarm Information
No alarm
Handling Process
    Entering and Coming out of the Sleep Mode:
To reduce power consumption, the terminal can be configured to enter sleep mode after the
terminal has been in the idle state for a defined period of time.


Procedure:

Step 1 From the home screen, select Settings, enter the administrator password (if set), and then select
OK to display the Settings screen.

Step 2 Select General.

Step 3 Set Enter sleep mode to 1 min, 5 min, 10 min,After 15 min, After 30 min, After 60 min, or
Never.
If Never is selected, the sleep function is disabled.

Step 4 Save the settings.
After the terminal enters the sleep mode, the STATUS indicator on the front panel remains steady
on.
----End

Root Cause
Particular terminals may not support the sleep function. Contact the device provider if this function is
required.

The terminal can be woken up by performing any operation on the terminal. For example, the
terminal wakes up if there is an incoming call, an operation is performed on the remote control,
or the terminal is connected to the Web interface.
Suggestions
Have to refer more documentation when  necessary.

END