Add MCU to SMC2

Publication Date:  2013-03-06 Views:  139 Downloads:  0
Issue Description
MCU VP6850
Alarm Information
you can't add the MCU to SMC.2
Handling Process
1- Use numbers in "gk prefix" field  in SMC2.0 web page not a characters . For Example "010"、“0086”and so on. Check the attached image.

2-Let the prefix is same at the MCU and the GK.[check the attached image]
3-check the “Access password” . [The default access password is “123456” ].
4-Check if the MCU is registered on GK or not .
5-You can delete the “GK Authentication Password” if you are not using an authentication .[Keep the field empty ]
Root Cause
the GK prefix is wrong . it must be number
the Password of the authentication and prefixes must be sam on the MCU and the GK