Esight can't add NEs throught SNMP

Publication Date:  2014-06-30 Views:  678 Downloads:  0
Issue Description
The error appeared when add NE on esigth through SNMP.
Alarm Information
Handling Process

1.Check the community write on esight and found that it is the same with the one configured on AC.
2. Check the configuration on AC and found it like below and the configuration is OK.
3. Check the IP address configured on esight and found that it can ping from esight to AC.
4. But i found that  there are commands "snmp-agent trap source Vlanif960: on AC, and the IP address of Vlanif960 is not the one which configured on esight. Try to change the IP address on esight with the one of Vlanif960, and the problem solved.

 snmp-agent local-engineid 800007DB03F84ABF594923
snmp-agent community write %@%@(}yE#/fK`+rHx<2b32r7'm=2[]b[%-~LQ0u)|:)QAD%"m=5'@H#*Z0Y915o<^M1VV<8K=>'m%@%@
snmp-agent community write %@%@[%OLJ=^{<!wg3[1eAzz8'X'RH^EtWRU4>36T[2,2+#:CX'U'0Ar~N/0C+%<tPeQy6]tB'^'X%@%@ mib-view View_ALL
undo snmp-agent community complexity-check disable
snmp-agent sys-info contact Huawei Germany
snmp-agent sys-info location Germany
snmp-agent sys-info version v2c
snmp-agent target-host trap-hostname ac address xx.xx.xx.xx udp-port 162 trap-paramsname ac
snmp-agent target-host trap-paramsname ac v2c securityname public
snmp-agent mib-view View_ALL include iso
snmp-agent trap source Vlanif960
snmp-agent trap enable
Root Cause
possible reasons:
1. Configuration wrong with esigh and AC.
2. Esight can't connect to AC.