s5300 switch stacking failure

Publication Date:  2014-10-16 Views:  378 Downloads:  0
Issue Description
** we connected stack cables and configured 2 s5328 HI switch as per Hedex standards below,

but switch are not joining the stack.

======switch 1 ========
#
sysname maggrsw01
#
#
interface stack-port 0/1
   port interface  xgi0/1/1 enable
   port interface  xgi0/1/2 enable
#

======switch 2 ========
#
sysname maggrsw02
#
#

interface stack-port 1/1
   port interface  xgi0/1/1 enable
   port interface  xgi0/1/2 enable
#
stack slot 0 renumber 1
stack slot 0 priority 100
stack slot 0 renumber 0
stack slot 0 priority 255
#
Alarm Information
Error:: it gives error that another switch connected through same logical stack port ID.
Handling Process

changed the member switch (2 ) logical stack port ID from 1/1 to 1/2 as below

interface stack-port 1/1
   port interface  xgi0/1/1 enable
   port interface  xgi0/1/2 enable
===== changes to below
interface stack-port 1/2
   port interface  xgi0/1/1 enable
   port interface  xgi0/1/2 enable
Root Cause
it requires to configure logical stack port id different on stack switches , earlier it was same that caused the problem.
Solution
changed stack port logical id different. and that solved the problem.

END