FAQ- How to Change the Boot Sequence of the Server

Publication Date:  2014-10-29 Views:  201 Downloads:  0
Issue Description
 How to Change the Boot Sequence of the Server
Solution
1) If the information shown in Figure 1 is displayed during system startup or restart, press Delete to enter the basic input/output system (BIOS).
      NOTE:

If the system has started, restart the server by referring to How to Restart the RH2285 Server (installed the NetEco).
Figure 1 Server startup screen



• For RH2285

    a. Choose Boot > Boot Device Priority by using arrow keys and press Enter.
    b. Choose 1st Boot Device and press Enter.
    c. Choose boot from the hard disk, such as SCSI:#400 ID004 L and press Enter.
    d. Press F10 and choose Save and Exit. Then press Enter to save the settings and restart the server.

• For RH2288

    a. Choose Boot > Boot Legacy by using arrow keys and press Enter.
    b. Choose Boot Type Order and press Enter.
    c. Press F5to choose boot from the hard disk, such as SCSI:#400 ID004 L and press Enter.
    d. Press F10 and choose Yes. Then press Enter to save the settings and restart the server.

END