FAQ-How to replace a Rectifier

Publication Date:  2014-10-30 Views:  358 Downloads:  0
Issue Description
How to replace a Rectifier?
Solution
Step 1 Put on protective gloves.

Step 2 Push the locking latch at the right side of the panel towards the left.

Step 3 Gently draw the handle outwards, and then remove the rectifier from the subrack, as shown in below Figure.



Step 4 Push the locking latch on the new rectifier towards the left, and pull out the handle.

Step 5 Place the new rectifier at the entry to the correct slot.

Step 6 Gently slide the rectifier into the subrack along the guide rail, and lock the handle, as shown in below Figure.




Step 7 Take off protective gloves.


END