Failure for the SoftCo to Play an Announcement When a User Under the SoftCo User Box Dials *125

Publication Date:  2015-07-15 Views:  207 Downloads:  0
Issue Description
When a user under the SoftCo user box dials *125, the SoftCo fails to play an announcement.
Handling Process
Step 1 Run the show digitmap protocol command to check whether the user box is configured with a digitmap. If no, this problem does not occur. If the user box is configured with a digitmap that does not work, run the config delete digitmap protocol command to delete the digitmap.

Step 2 If the fault persists, contact Huawei technical support engineers.

----End
Root Cause
The possible cause is that, after the user box is configured with a digitmap and outgoing prefixes, the SoftCo processes *125 as an outer-going number.

END