FAQ-What Measures Should Be Taken When an AP Fails to Obtain an IP Address Using DHCP

Publication Date:  2015-06-26 Views:  167 Downloads:  0
Issue Description
What Measures Should Be Taken When an AP Fails to Obtain an IP Address Using DHCP?
Solution
Perform the following steps to locate the fault:

1, Check whether the AP is configured to obtain an IP address using DHCP.

2, Check whether the Layer 2 link between the AP and DHCP server is working properly.

3, Run the display ip pool name ip-pool-name used command on the DHCP server to check whether the AP has obtained an IP address.

END