FAQ-Why Is Displayed Radio Member Traffic Information Inaccurate

Publication Date:  2015-06-26 Views:  174 Downloads:  0
Issue Description
Why Is Displayed Radio Member Traffic Information Inaccurate?
Solution
When you display information about all load balancing groups, the radio member traffic information is inaccurate. The possible causes are as follows:

1, Radio frequency does not work up to snuff and upstream and downstream services are abnormal.

2, The AP does not report traffic information at an interval of 30s. You can use the display load-balance-group all command to check load balancing information.

3, Traffic information in the packets reported by the AP is inaccurate.

4, The AC does not receive or correctly process the packets reported by the AP.

END