Step 1 Log in to the IPC web page as the admin user.
For details about the default password of the admin user, see the user guide for the device.
Step 2 Choose Settings > System Configuration > Configuration Management (eSpace IPC 2611-F is used as an example here). The page shown in Figure 1 is displayed.
Figure 1 Configuration Management page
Step 3 Click Instant Formatting. The SD card is formatted.
Back up data before formatting an SD card.
All data will be lost after an SD card is formatted. Exercise caution when performing this operation.
Do not format an SD card when data is being read from or written into the SD card.
Do not remove an SD card when the SD card is being formatted or when data is being written into the SD card.
Format an SD card during off-peak hours.
Step 4 Check whether the fault is rectified.
If yes, no further operation is required.
If no, contact your service provider.