How should I restore the factory defaults of a box camera?
Use either of the following methods:
1. Hold down the RESET button on the IPC for more than 3 seconds.
2. Use SSH to log in to the IPC as the admin user, go to the rm -f /usr/log/config* and rm -f /usr/setting/config* command, run the reboot -f command to restart the IPC.
3. Access the Restore the Factory Defaults page of the IPC web system.
For details about how to restore a camera to factory settings on its web page, see the corresponding Online Help.
The FAQ may occur on the following models of IPCs: IPC2601-P, IPC5601-P, IPC2701-P, IPC5701-P, IPC2811-WD-Z20, IPC5811-WD-Z20, IPC2611-LTE, IPC2611-F, IPC5611-F, IPC5611-WD-F, IPC6111-I, IPC6111-L1-I, IPC6121-I, IPC6121-WD-I, IPC6511-Z20-FI, IPC6511-Z20-I, IPC6521-Z20-FI, or IPC6521-Z20-I.
For details about the default password of the admin user, see the <<User Guide >> corresponding to the device.