FAQ-How Can the BST Function Be Enabled in the S2600 V100R001 Storage System

Publication Date:  2015-07-23 Views:  311 Downloads:  0
Issue Description
How can the BST function be enabled in the S2600 V100R001 storage system?

Solution
Enable the BST function as follows:

1.  Go to the man-machine language (MML) mode.

a.  In command-line interface mode, enter debug and the password to go to the debug mode.


admin:/>debug
Enter Password:
Storage:~ #


b.  In debug mode, enter mml to go to the MML mode.

Storage:~ # mml
UI_Thread begin to run, host ip=127.0.0.1..
MML>


2.  Run bst enable 3 in MML mode to check whether the BST function is enabled.

MML>bst enable 3
    Status: 2 (1-enable 2-disable)


As shown in the previous screen, if the value of Status is 2, the BST function is disabled.

NOTE:
If the value of Status is 1, the BST function is enabled.

3.  Run bst enable 1 in MML mode to enable the BST function.


MML>bst enable 1
    Set BST status: 1 (1-enable 2-disable)

END