FAQ-No Signals During a Presentation on the VP9039S

Publication Date:  2015-08-06 Views:  156 Downloads:  0
Issue Description
When a video table is extended to 30 meters, no signals are displayed on the VP9039S during a presentation, but terminal configurations are correct.
This fault is caused by signal attenuation due to too long video cables. To solve this fault, use the cables of the recommended length. Table 7-1 lists the terminal interfaces and cables.

Table 7-1 Interfaces and cables

   The field Universal in Table 7-1 means whether the cables of the same model purchased in the market
can be used as the matched cables of the terminal.
   The maximum transmission distance of cables is determined by cable quality and signal quality. The
maximum transmission distance in Table 7-1 are calculated under optimal conditions.