STA fails to search 802.11n signals after the AP is enabled with 802.11n(V2R6)

Publication Date:  2016-03-25 Views:  316 Downloads:  0
Issue Description

A STA  that uses a 802.11b/g/n NIC cannot find 802.11n signals of the AP even though the AP is enabled with the standard

Solution
This problem can appear in the following cases: 

1.    When the WLAN security profile of the AP is configured with WEP or TKIP encryption. 

The 802.11n does not define the WEP or TKIP encryption mode. When the two encryption modes are used, STAs may fail to associate with the AP by using the 802.11n standard.

 Example of security policy configuration that can cause the problem:
 security-profile name default
  security wpa psk pass-phrase %^%#&"-o#uzb)LYu;!/Pyv~%5=pf2mZodM'3wo4+qqdO%^%# tkip 

 To avoid this problem, we recommend on using a different encryption method instead of TKIP.
 
2.    WMM(Wi-Fi Multimedia) is disabled under the WLAN radio profile of the AP.

 For 802.11n standard WMM is a mandatory requirement and in the case where WMM is disabled in the WLAN radio, the stations will not be able to associate on the AP by using this standard. Hence, the station will continue to associate by using legacy standards as 802.11a/b/g.

 Example of radio profile configuration  that can cause the problem:
 radio-2g-profile name default
  wmm disable   
  radio-type dot11n

 To avoid this problem, we recommend on keeping the WMM enabled.

 

END