add a cloud element, move mouse cursor to cloud element, and click mouse right button,
Open Cloud configuration interface, select the binding information, add a UDP and a network card.
Select a network card (if you select physical network card, must keep it up, that is, it is connected the cable and configured IP address).
As follows Add UDP and network cards in the order of the figure.
Operation steps are as follows，
1, select UDP
2, click the Add
3, select a network card
4, click the Add
5, select the port number is 2
6, check the two-way channel
7, click the Add
Later in the CLI PC window, you can Ping test
IP Windows configuration
Ethernet adapter local connection 4:
DNS suffix attached to a specific:
IPv4 address . . . . . . . . . . : 192.168.168.11
A subnet mask. . . . . . . . . . : 255.255.255.0
The default gateway.........:
Being 192.168.168.1 Ping with 32 bytes of data:
Reply from =146ms: byte =32 time TTL=255 192.168.168.1
Ping statistical information of 192.168.168.1:
Packet: Sent = 4, Received = 4, lost = 0 (0% lost),
Average time of round trip (in milliseconds):
The shortest = 5ms, the longest = 146ms, average = 79ms
If you can ping and then you can login firewall in the IE browser as follows URL
And then the login window is pushed up.