No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Huawei V2 and V3 Server RAID Controller Card User Guide 25

This document describes the appearances and features of the redundant array of independent disks (RAID) controller cards, how to configure properties for the RAID controller cards, and how to install drivers. The RAID controller cards include the LSI SAS2208, LSI SAS2308, LSI SAS3008, LSI SAS3108, LSI SoftRAID, PM8060, and PM8068.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
About This Document

About This Document

Purpose

This document describes the appearances and features of the redundant array of independent disks (RAID) controller cards, how to configure properties for the RAID controller cards, and how to install drivers. The RAID controller cards include the LSI SAS2208, LSI SAS2308, LSI SAS3008, LSI SAS3108, LSI SoftRAID, PM8060, and PM8068.

Intended Audience

This document is intended for:

  • Technical support engineers
  • Maintenance engineers

The server maintenance personnel must have adequate knowledge about the server products and service skills to avoid injury to human body or damage to devices during maintenance.

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol

Description

Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results.

NOTICE is used to address practices not related to personal injury.

Calls attention to important information, best practices and tips.

NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration.

Change History

Changes between document issues are cumulative. The latest document issue contains all changes made in previous issues.

Issue 25 (2018-08-28)

This issue is the twenty-fifth official release.

Modified the "Hard Drive Faults" sectoin for each type of RAID controller card.

Issue 24 (2018-08-21)

This issue is the twenty-fourth official release.

Added the overview and configuration about LSI SAS3008IT.

Issue 23 (2018-07-20)

This issue is the twenty-third official release.

Added the description of indicators on RAID controller cards.

Issue 22 (2018-07-01)

This issue is the twenty-second official release.

Modified this document.

Issue 21 (2018-06-26)

This issue is the twenty-first official release.

Added operations for restoring hard drives to the Frn-bad state for the LSI SAS3108.

Issue 20 (2018-05-23)

This issue is the twentieth official release.

Deleted the chapter "Environmental Specifications".

Issue 19 (2018-04-20)

This issue is the nineteenth official release.

  • Optimized the document structure.
  • Updated GUI screenshots for the LSI SAS3108 to match firmware 4.660.00-8102 or later, and added new parameters.

Issue 18 (2018-01-25)

This issue is the eighteenth official release.

Added the meaning of suffixes in RAID controller card names.

Issue 17 (2018-01-10)

This issue is the seventeenth official release.

Added MegaRAID Storage Manager description for the LSI SAS2208 and LSI SAS3108.

Issue 16 (2017-12-22)

This issue is the sixteenth official release.

Added RAID controller card features.

Issue 15 (2017-10-16)

This issue is the fifteenth official release.

Optimized the document structure.

Issue 14 (2017-08-01)

This issue is the fourteenth official release.

Issue 13 (2017-05-20)

This issue is the thirteenth official release.

Issue 12 (2016-12-07)

This issue is the twelfth official release.

Changed the commands of the LSI SAS3108.

Issue 11 (2016-10-27)

This issue is the eleventh official release.

Issue 10 (2016-03-28)

This issue is the tenth official release.

Added the PM8060 and PM8068.

Issue 09 (2016-01-30)

This issue is the ninth official release.

Deleted the JBOD information about LSI SAS3108.

Issue 08 (2015-10-28)

This issue is the eighth official release.

Added the note about authentication mechanism.

Issue 07 (2015-09-15)

This issue is the seventh official release.

Optimized the document structure.

Issue 06 (2014-12-23)

This issue is the sixth official release.

Issue 05 (2014-09-18)

This issue is the fifth official release.

Issue 04 (2014-03-03)

This issue is the fourth official release.

Added the limited number of hard drives can be configured with RAID properties for LSI SAS2308 controller card.

Issue 03 (2014-01-30)

This issue is the third official release.

Added the overview and configuration about SoftRAID.

Issue 02 (2013-04-19)

This issue is the second official release.

Added the appendix.

Issue 01 (2012-06-15)

This issue is the first official release.

Translation
Download
Updated: 2018-09-05

Document No.: EDOC1000004186

Views: 122530

Downloads: 18717

Average rating:
This Document Applies to these Products
Related Documents
Share
Previous Next