所选语种没有对应资源,请选择:

本站点使用Cookies,继续浏览表示您同意我们使用Cookies。Cookies和隐私政策>

提示

尊敬的用户,您的IE浏览器版本过低,为获取更好的浏览体验,请升级您的IE浏览器。

升级

OceanStor 18500 V3&18800 V3 高端存储系统 V300R003 命令参考 08

"本文档针对DeviceManager管理软件提供的CLI(Command Line Interface)命令行,介绍如何使用CLI设置、管理存储系统,以及按功能分类详细介绍各命令的使用方法。"
评分并提供意见反馈 :
华为采用机器翻译与人工审校相结合的方式将此文档翻译成不同语言,希望能帮助您更容易理解此文档的内容。 请注意:即使是最好的机器翻译,其准确度也不及专业翻译人员的水平。 华为对于翻译的准确性不承担任何责任,并建议您参考英文文档(已提供链接)。
前 言

前 言

概述

本文档针对DeviceManager管理软件提供的CLI(Command Line Interface)命令行,介绍如何使用CLI设置、管理存储系统,以及按功能分类详细介绍各命令的使用方法。

读者对象

本文档主要适用于以下工程师:

  • 技术支持工程师
  • 维护工程师

符号约定

在本文中可能出现下列标志,它们所代表的含义如下。

符号

说明

用于警示紧急的危险情形,若不避免,将会导致人员死亡或严重的人身伤害。

用于警示潜在的危险情形,若不避免,可能会导致人员死亡或严重的人身伤害。

用于警示潜在的危险情形,若不避免,可能会导致中度或轻微的人身伤害。

用于传递设备或环境安全警示信息,若不避免,可能会导致设备损坏、数据丢失、设备性能降低或其它不可预知的结果。

“注意”不涉及人身伤害。

用于突出重要/关键信息、最佳实践和小窍门等。

“说明”不是安全警示信息,不涉及人身、设备及环境伤害信息。

修订记录

修改记录累积了每次文档更新的说明。最新版本的文档包含以前所有文档版本的更新内容。

文档版本 08 (2018-05-30)

第八次正式发布。

修改命令:
  • change performance strategy
  • show controller general

文档版本 07 (2017-11-30)

第七次正式发布。

修改命令:
  • create disk_domain
  • change disk_domain general

文档版本 06 (2017-03-27)

第六次正式发布。

新增命令:
  • show file export_path
  • change service cifs
  • show service cifs
  • show file notification
  • create hyper_metro_pair unified
  • change hyper_metro_pair general
  • change hyper_metro_consistency_group general
  • create hyper_metro_consistency_group general
  • show svp management_ip
  • create user
  • change initiator
  • add storage_pool tier
  • change system write_through_policy
  • change storage_pool analysis
  • clear port bit_error
  • change devicemanager tls
  • reboot storage service
修改命令:
  • show storage_pool tier
  • remove consistency_group remote_replication
  • change clone synchronize
  • show system media_scan
  • change system media_scan
  • show system write_through_policy
  • poweron interface_module
  • show port ip
  • show port route
  • change icmp switch
  • show fan
  • show expansion_module
  • show bbu general
  • change ftds level
  • show system config_model
  • add remote_device link fc
  • add disk_domain disk
  • show power_supply
  • change smart_cache_partition general
  • show license_active
  • show license
  • delete consistency_group
  • show controller general
  • show notification trap
  • change devicemanager tls
  • show system general
  • create quorum_server general
  • change remote_device general
  • upgrade svp vm_system
  • restore svp vm_system
  • show svp management_ip
  • change svp management_ip
  • delete bond_port
  • change system write_through_policy
  • add hypervault remote_resource
  • change hyper_metro_pair general
  • show hyper_metro_consistency_group general
  • add notification trap
  • add mirror_lun remote_mirror_copy
  • add mirror_lun local_mirror_copy
  • remove logical_port ipv4_route
  • remove logical_port ipv6_route
  • delete logical_port general
  • show vlan general
  • show vlan count
  • show bond_port
  • delete remote_device
  • change remote_device user_password
  • create disk_domain
  • remove remote_device link iscsi
  • remove remote_device link fc
  • change quorum_server general
  • create hypervault general
  • show diagnose_code
  • add storage_pool tier
  • change mm_user password
  • show alarm
  • reboot system
  • test ldap configuration
  • show service ndmp_tape
  • show consistency_group general
  • create storage_pool
  • create hyper_metro_pair unified
  • show hyper_metro_pair general
  • change service cifs_config
  • show service cifs_config
  • import license
  • show event
  • change safe_strategy
  • show user
  • show performance file
  • change user_lock
  • change user_unlock
  • create remote_device general
  • add remote_device link iscsi
  • change remote_device link
  • create user
  • show ftds switch
  • change ftds switch
  • change logical_port general
  • show dns_server general
  • change domain nis_config
  • show service cifs
  • change homedir general
  • change homedir enabled
  • show homedir general
  • change domain ldap_config
  • show ib_port general
  • show service nfs_config
  • change service nfs_config
  • change service nfs
  • create share_permission nfs
  • show service nfs
  • show service http
  • show service ndmp
  • delete lun_migration
  • poweroff interface_module
  • remove port ipv4_route
  • show enclosure
  • change initiator
  • show share cifs
  • change share cifs
  • create bond_port
  • show port bit_error
  • change logical_port failback
  • add port ipv4_route
  • show interface_module
  • add port ipv6_route
  • create share cifs
  • create initiator fc
  • create initiator iscsi
  • show initiator
  • create hyper_metro_consistency_group general
  • change snapshot deactivate
  • change ib_initiator general
  • create ib_initiator general
  • add kmc general
  • add kmc test
  • export configuration_data
  • change service cifs
  • change hyper_metro_consistency_group general
  • show kmc general
  • change system management_ip
  • change notification trap
  • show logical_port route
  • show logical_port general
  • change logical_port failover_group
  • change file_extension_filter cifs
  • create file_extension_filter cifs
  • delete file_extension_filter cifs
  • show file_extension_filter cifs_count
  • show file_extension_filter cifs
  • add logical_port ipv6_route
  • add logical_port ipv4_route
  • show file notification
  • show performance threshold
  • change performance threshold
  • add consistency_group remote_replication_delay
  • show replication_connection_status general
  • show performance consistency_group
  • show lun hyper_metro_pair
  • show file export_path
  • show file package_result
  • delete file

文档版本 05 (2016-11-20)

第五次正式发布。

新增命令:
  • delete ssh known_hosts
  • create device_manager encrypt_key
  • show user_session number
  • change user_session number
  • add devicemanager dos_whitelist
  • show devicemanager dos_whitelist
  • remove devicemanager dos_whitelist
  • reboot storage service
  • change notification email
  • add devicemanager dos_whitelist
  • show devicemanager dos_whitelist
  • remove devicemanager dos_whitelist
  • change rest msg_return_type
  • change ssl_certificate passphrase
  • add logical_port ipv4_route
  • add logical_port ipv6_route
修改命令:
  • import license
  • export license
  • delete lun_migration
  • show clone secondary_lun
  • show security_rule
  • delete ldap configuration
  • show upgrade package
  • show system client_name
  • show version all
  • poweroff interface_module
  • poweron interface_module
  • show interface_module
  • change port eth
  • remove port ipv4_address
  • change port ipv4_address
  • add port ipv6_route
  • remove port ipv4_route
  • remove port ipv6_route
  • remove port ipv6_address
  • change port ipv6_address
  • add port ipv4_route
  • change system management_ip
  • show enclosure
  • change ftds switch
  • show ftds switch
  • change common_config cifs
  • change service ndmp_scanbus
  • show share_permission ftp_count
  • change notification trap
  • show port bit_error
  • add clone secondary_lun
  • import ssl_certificate
  • delete user
  • change security_rule enabled
  • add security_rule
  • create lun_migration
  • swap remote_replication
  • change interface_module
  • show ib_port general
  • create ib_initiator general
  • change ib_initiator general
  • change initiator
  • change common_config nfs
  • create initiator fc
  • change mapping_view
  • show performance remote_replication
  • create initiator iscsi
  • show performance ib_port
  • show performance port
  • show performance nfs_service
  • show initiator
  • show common_config nfs
  • export event
  • change system timezone
  • show ldap configuration
  • export configuration_data
  • show kmc general
  • show performance smartqos_policy
  • show remote_replication general
  • show consistency_group general
  • show ib_initiator general
  • show performance nfs_share
  • change host_auto_scan
  • poweron virtual_machine
  • remove virtual_machine vm_iso
  • poweroff virtual_machine
  • reboot virtual_machine
  • remove virtual_machine port
  • delete virtual_machine general
  • add virtual_machine port
  • show vmtools general
  • delete kmc general
  • add kmc general
  • add kmc test
  • change snapshot deactivate
  • show performance host
  • show performance storage_pool
  • create bond_port
  • show performance lun_priority
  • show performance bond_port
  • show performance disk_domain
  • show performance lun
  • change port fc
  • change alarm_object_mask
  • show performance disk
  • show performance link
  • create vm_template general
  • add virtual_machine vmtools
  • add virtual_machine vm_iso
  • upgrade virtual_machine vmtools

文档版本 04 (2016-07-25)

第四次正式发布。

新增命令:
  • show virtual_machine vcpu_isolate_switch
  • change user_session number
  • show user_session number
  • show system config_model
修改命令:
  • change share_permission cifs
  • create share_permission cifs
  • delete share_permission cifs
  • remove lun_copy other_vendor_target
  • show clone secondary_lun
  • show upgrade package
  • change port eth
  • change disk_domain rekey
  • create lun_copy other_vendor
  • create antivirus_scan policy
  • change remote_replication synchronize
  • change remote_replication split
  • delete remote_replication
  • create remote_device general
  • change user_lock
  • add clone secondary_lun
  • delete user
  • create lun_migration
  • change quota_tree general
  • swap remote_replication
  • change service nfs_config
  • show service nfs_config
  • create user
  • change vlan general
  • show user
  • change snmp safe_strategy
  • show vm_container general
  • show system work_mode
  • change hypervault_copy restore
  • change system work_mode
  • change user
  • change user_unlock
  • create antivirus_server general
  • show performance disk
  • show performance lun_priority
  • change service cifs_config
  • change cli
  • create remote_replication general
  • reboot storage service
  • create remote_replication unified
  • show remote_replication unified
  • change service ftp
  • show share_permission cifs
  • change domain ldap_config
  • show service cifs_config
  • create share nfs
  • change share nfs
  • show port bit_error
  • show service cifs_config
  • change service cifs_config
  • swap remote_replication
  • change bond_port general
  • create user
  • change user_session number
  • create antivirus_server general
  • change user_session number
  • add clone secondary_lun
  • show clone secondary_lun
  • change port eth
  • change vlan general
  • change bond_port general
  • change quota_tree general
  • reboot storage service

文档版本 03 (2016-04-30)

第三次正式发布。

新增命令:
  • add consistency_group remote_replication_delay
  • show service ndmp_tape
  • change share nfs
  • show host reachable
  • change devicemanager tls
  • show identity_mapping mapped_user
  • show identity_mapping config
  • delete identity_mapping rule
  • change identity_mapping config
  • clear identity_mapping config
  • add identity_mapping rule
  • change identity_mapping rule
  • show identity_mapping rule_count
  • show devicemanager tls_versions
  • reboot storage service
  • show persistent_mirror silence_time
  • show diagnose_code
  • show identity_mapping rule
  • create share_ip_control cifs
  • change share_ip_control cifs
  • delete share_ip_control cifs
  • show share_ip_control cifs
  • show share_ip_control cifs_count
  • add smtp_server general
  • remove smtp_server general
  • change smtp_server config
  • show smtp_server general
  • test smtp_server general
  • show notification receiver
  • add ntp_server general
  • remove ntp_server general
  • change ntp_server config
  • show ntp_server general
  • delete ssh known_hosts
修改命令:
  • show storage_pool tier
  • export cli history
  • show cli configuration
  • export license
  • change reduction general
  • delete share cifs
  • show share_permission nfs
  • create lun_group
  • scan remote_lun
  • add host ib_initiator
  • create host_group
  • add host_group host
  • show port_group port
  • delete smartqos_template
  • create snapshot general
  • create consistency_group synchronization
  • change clone split
  • create fs_snapshot general
  • delete fs_snapshot general
  • delete iscsi target
  • change system client_name
  • change system location
  • change system name
  • show system ntp
  • change system ntp
  • change system management_ip
  • add logical_port ipv4_route
  • add logical_port ipv6_route
  • show lun_takeover general
  • change common_config cifs
  • show common_config cifs
  • show service cifs_config
  • show service http
  • remove remote_device link fc
  • remove remote_device link iscsi
  • change smartqos_policy general
  • remove smartqos_policy lun
  • add smartqos_policy lun_group
  • remove smartqos_policy file_system
  • delete smartqos_policy
  • add smartqos_policy file_system
  • change share cifs
  • delete remote_device
  • show resource_user safe_strategy
  • add mapping_view lun_group
  • remove virtual_machine vmtools
  • remove host vhost_initiator
  • show port bit_error
  • show smart_cache_pool disk
  • remove smart_cache_partition lun
  • add smart_cache_partition lun
  • add smart_cache_partition file_system
  • delete file_system worm
  • delete security_rule
  • change lun_migration_split consistency
  • show storage_pool general
  • change controller smartport_work_mode
  • show remote_lun count
  • show remote_device link
  • delete share nfs
  • change service cifs_config
  • show port general
  • show controller general
  • show ib_port general
  • create share cifs
  • show share_permission cifs
  • change domain ad_config
  • add storage_pool tier
  • remove smart_cache_partition file_system
  • create iscsi target
  • change iscsi target
  • change service http
  • create lun_takeover general
  • change hyper_metro_pair synchronize
  • create storage_pool
  • pause virtual_machine
  • show performance remote_replication
  • add host initiator
  • change user
  • show performance storage_pool
  • show performance ib_port
  • show performance bond_port
  • show performance controller
  • show performance host
  • show performance lun_priority
  • show performance port
  • show performance file_system
  • show performance link
  • show performance file
  • delete performance file
  • show alarm
  • export event
  • show notification email
  • change service ndmp_config
  • change alarm_object_mask
  • add cache_partition lun
  • create share nfs
  • create share_permission nfs
  • create smartqos_policy
  • add smartqos_policy lun
  • add cache_partition file_system
  • remove cache_partition file_system
  • export running_data
  • show performance smartqos_policy
  • show performance cache_partition
  • export performance file
  • remove cache_partition lun
  • change consistency_group general
  • create consistency_group asynchronization
  • show performance lun
  • show performance disk_domain
  • change remote_replication general
  • show remote_lun path_status
  • show performance disk
  • change vhost_initiator general
  • delete quorum_server general
  • remove quorum_server_link general
  • delete hyper_metro_pair general
  • delete hyper_metro_domain general
  • remove hyper_metro_domain quorum_server
  • show remote_lun general
  • change quorum_server general
  • add lun_group lun
  • remove virtual_machine block
  • export certificate
  • change resource_user general
  • show remote_replication general
  • show consistency_group general
  • show domain ldap
  • delete domain ldap
  • create remote_replication unified
  • create remote_replication general
  • change domain nis_config
  • delete hypervault_policy general
  • remove host_group host
  • show notification email_extend
  • add virtual_machine block
  • show remote_device link_rtt
  • delete hyper_metro_consistency_group
  • remove hyper_metro_consistency_group pair
  • show notification syslog
  • show notification sms
  • add snmp usm
  • change snmp community
  • show snmp usm
  • change snapshot activate
  • change file_system dedup_compress
  • change notification syslog
  • show remote_replication unified
  • change snmp version
  • change cli
  • create antivirus_server general
  • add host vhost_initiator
  • show vhost_initiator general
  • change virtual_machine general
  • change notification email_extend
  • change notification email
  • change snmp usm
  • change service ftp
  • add notification trap
  • create hyper_metro_pair unified
  • show lun dedup_compress
  • show file_system general
  • change user_unlock
  • export configuration_data
  • change snapshot deactivate
  • delete snapshot
  • change lun
  • change snapshot reactivate
  • show hypervault general
  • change alarm_mask
  • show hypervault_copy general
  • show event
  • change hypervault_policy general
  • add mapping_view host_group
  • create mapping_view
  • change resource_user safe_strategy
  • delete notification trap
  • add mapping_view port_group
  • remove lun_group lun
  • change service cifs
  • change service nfs
  • show performance elink
  • change domain ad_prefdc
  • show performance snapshot
  • change bond_port general
  • reboot system
  • change storage_pool general
  • change domain ldap_config
  • create hypervault general
  • add hypervault remote_resource
  • show share cifs
  • change file_system enabled
  • delete file_system general
  • create lun
  • show share nfs
  • create file_system general

文档版本 02 (2015-12-10)

第二次正式发布。

新增命令:
  • change hypervault_copy general
  • change audit_strategy
  • show audit_strategy
  • show remote_device link_rtt
  • change notification email_extend
  • show notification email_extend
  • create hyper_metro_consistency_group general
  • add hyper_metro_consistency_group pair
  • change hyper_metro_consistency_group general
  • delete hyper_metro_consistency_group
  • change hyper_metro_consistency_group pause
  • change hyper_metro_consistency_group priority
  • remove hyper_metro_consistency_group pair
  • show hyper_metro_consistency_group general
  • change hyper_metro_consistency_group start
  • change hyper_metro_consistency_group synchronize
  • show hyper_metro_consistency_group pair
  • show snapshot childsnap
  • change system permission_hardening
  • change notification sms
  • change notification syslog
  • show notification syslog
  • show notification sms
  • show event_config
  • change event_config
  • add notification receiver
  • change antivirus pre_shared_key
  • show system permission_hardening
  • Change file_system traversedir
  • change system work_mode
  • show system work_mode
  • create hyper_metro_consistency_group verification_session
  • remove notification receiver
更新命令:
  • add consistency_group remote_replication
  • add hyper_metro_consistency_group pair
  • add hypervault remote_resource
  • add kmc general
  • add kmc test
  • add lun_copy remote_target
  • add mapping_view host_group
  • add mapping_view port_group
  • add notification receiver
  • add notification trap
  • add port_group port
  • add snmp usm
  • change alarm_mask
  • change antivirus_server general
  • change audit_strategy
  • change bond_port general
  • change cli
  • change consistency_group split
  • change consistency_group synchronize
  • change disk_domain general
  • change dns_server general
  • change domain ad_prefdc
  • change domain ldap_config
  • change domain nis_config
  • change event_restore address
  • change failover_group general
  • change file_system dedup_compress
  • change file_system enabled
  • change host_auto_scan
  • change hyper_metro_consistency_group pause
  • change hyper_metro_consistency_group priority
  • change hyper_metro_consistency_group start
  • change hyper_metro_consistency_group synchronize
  • change hyper_metro_pair general
  • change hyper_metro_pair pause
  • change hypervault start
  • change hypervault_copy general
  • change hypervault_copy restore
  • change hypervault_job cancel
  • change hypervault_job pause
  • change hypervault_policy general
  • change ldap configuration
  • change lun
  • change notification email_extend
  • change notification sms
  • change notification syslog
  • change notification trap
  • change performance restore
  • change persistent_mirror silence_time
  • change port fc
  • change resource_user safe_strategy
  • change service cifs
  • change service nfs
  • change share_permission ftp
  • change snapshot activate
  • change snapshot deactivate
  • change snapshot io_priority
  • change snapshot reactivate
  • change snapshot restore
  • change snmp community
  • change snmp port
  • change snmp safe_strategy
  • change snmp usm
  • change snmp version
  • change ssl_certificate passphrase
  • change storage_pool general
  • change system permission_hardening
  • change system work_mode
  • change system write_through_policy
  • change user_unlock
  • chgibcpasswd
  • chgsuperpasswd
  • create antivirus_server general
  • create bond_port
  • create clone
  • create file_system general
  • create fs_snapshot schedule
  • create hyper_metro_consistency_group general
  • create hyper_metro_pair unified
  • create hypervault general
  • create hypervault_policy general
  • create ldap configuration
  • create logical_port bond
  • create logical_port eth
  • create logical_port vlan
  • create lun
  • create mapping_view
  • create port_group
  • create resource_user general
  • create share_permission ftp
  • delete bond_port
  • delete consistency_group
  • delete domain ldap
  • delete file_system general
  • delete hyper_metro_consistency_group
  • delete hypervault general
  • delete ib_initiator general
  • delete initiator fc
  • delete initiator iscsi
  • delete kmc general
  • delete logical_port general
  • delete lun
  • delete lun_destroy_data
  • delete notification trap
  • delete resource_group
  • delete resource_user
  • delete snapshot
  • delete snmp usm
  • export configuration_data
  • ibcpasswd
  • initibckey
  • initpasswd
  • poweroff system
  • reboot system
  • remove consistency_group remote_replication
  • remove host_group host
  • remove hyper_metro_consistency_group pair
  • remove hypervault remote_resource
  • remove logical_port ipv4_route
  • remove logical_port ipv6_route
  • remove lun_group lun
  • remove port_group port
  • scan host
  • show audit_strategy
  • show bond_port_count
  • show disk general
  • show dns_server general
  • show domain ldap
  • show event
  • show file_system cache_partition
  • show file_system general
  • show hyper_metro_consistency_group general
  • show hyper_metro_consistency_group pair
  • show hyper_metro_domain general
  • show hyper_metro_pair general
  • show hypervault general
  • show hypervault_copy general
  • show hypervault_job general
  • show hypervault_policy general
  • show ib_initiator general
  • show lun dedup_compress
  • show lun general
  • show lun_copy general
  • show notification trap
  • show performance elink
  • show performance nfsv3
  • show performance nfsv4
  • show performance smb1
  • show performance smb2
  • show performance snapshot
  • show port initiator
  • show remote_device link_rtt
  • show remote_lun path
  • show remote_replication available_file_system
  • show remote_replication unified
  • show service cifs
  • show service ftp
  • show share cifs
  • show share nfs
  • show share nfs_count
  • show snapshot childsnapshot
  • show snapshot general
  • show snmp port
  • show snmp safe_strategy
  • show snmp usm
  • show snmp version
  • show system dst
  • show system general
  • show vlan general
  • showsuperadmin
  • swap consistency_group

文档版本 01 (2015-08-30)

第一次正式发布。

翻译
English
下载文档
更新时间:2018-07-03

文档编号:EDOC1000084027

浏览量:9253

下载量:683

平均得分:
本文档适用于这些产品
相关文档
分享
上一页 下一页