所选语种没有对应资源,请选择:

本站点使用Cookies,继续浏览表示您同意我们使用Cookies。Cookies和隐私政策>

提示

尊敬的用户,您的IE浏览器版本过低,为获取更好的浏览体验,请升级您的IE浏览器。

升级
菜单

OceanStor 2000, 2000F, 5000, 5000F, 6000, 6000F V3系列 V300R006 命令参考

本产品文档适用于OceanStor 2200 V3, 2600 V3, 2600F V3, 5300 V3, 5500 V3, 5600 V3, 5800 V3, 6800 V3, 5500F V3, 5600F V3, 5800F V3, 6800F V3。针对DeviceManager管理软件提供的CLI(Command Line Interface)命令行,介绍如何使用CLI设置、管理存储系统,以及按功能分类详细介绍各命令的使用方法。
评分并提供意见反馈 :
华为采用机器翻译与人工审校相结合的方式将此文档翻译成不同语言,希望能帮助您更容易理解此文档的内容。 请注意:即使是最好的机器翻译,其准确度也不及专业翻译人员的水平。 华为对于翻译的准确性不承担任何责任,并建议您参考英文文档(已提供链接)。
前 言

前 言

概述

本文档针对DeviceManager管理软件提供的CLI(Command Line Interface)命令行,介绍如何使用CLI设置、管理存储系统,以及按功能分类详细介绍各命令的使用方法。

本文档适用的产品型号如下所示。

产品系列

产品型号

OceanStor 2000 V3系列

OceanStor 2100 V3/2200 V3/2600 V3/2600 V3视频监控版

OceanStor 5000 V3系列

OceanStor 5300 V3/5500 V3/5600 V3/5800 V3

OceanStor 6000 V3系列

OceanStor 6800 V3

OceanStor 2000F V3系列

OceanStor 2600F V3

OceanStor 5000F V3系列

OceanStor 5500F V3/5600F V3/5800F V3

OceanStor 6000F V3系列

OceanStor 6800F V3

读者对象

本文档主要适用于以下工程师:

  • 技术支持工程师
  • 维护工程师

符号约定

在本文中可能出现下列标志,它们所代表的含义如下。

符号

说明

用于警示紧急的危险情形,若不避免,将会导致人员死亡或严重的人身伤害。

用于警示潜在的危险情形,若不避免,可能会导致人员死亡或严重的人身伤害。

用于警示潜在的危险情形,若不避免,可能会导致中度或轻微的人身伤害。

用于传递设备或环境安全警示信息,若不避免,可能会导致设备损坏、数据丢失、设备性能降低或其它不可预知的结果。

“注意”不涉及人身伤害。

用于突出重要/关键信息、最佳实践和小窍门等。

“说明”不是安全警示信息,不涉及人身、设备及环境伤害信息。

修订记录

修改记录累积了每次文档更新的说明。最新版本的文档包含以前所有文档版本的更新内容。

文档版本 06 (2018-05-09)

第六次正式发布。

新增命令:
  • change snapshot description
  • change snapshot capacity
  • change vlan general
  • create vlan general
  • delete vlan general
  • show vlan general
  • change hyper_metro_pair priority
  • show hyper_metro_domain general
  • add hyper_metro_domain quorum_server
  • change hyper_metro_domain general
  • delete hyper_metro_domain general
  • remove hyper_metro_domain quorum_server
  • create hyper_metro_domain general
  • add hyper_metro_consistency_group pair
  • change hyper_metro_consistency_group synchronize
  • change hyper_metro_consistency_group pause
  • change hyper_metro_consistency_group priority
  • change hyper_metro_consistency_group start
  • create hyper_metro_consistency_group verification_session
  • remove hyper_metro_consistency_group pair
  • delete hyper_metro_consistency_group
  • create hyper_metro_consistency_group general
  • change hyper_metro_consistency_group general
  • change hyper_metro_pair general
  • swap hyper_metro_vstore_pair worksite
  • delete hyper_metro_vstore_pair general
  • create hyper_metro_vstore_pair general
  • show hyper_metro_vstore_pair general
  • change hyper_metro_vstore_pair general
  • show hyper_metro_vstore_pair check_session
  • change hyper_metro_vstore_pair start
修改命令:
  • add smartqos_policy lun
  • add smartqos_policy lun_group
  • change reduction general
  • change smartqos_policy enabled
  • remove cache_partition file_system
  • change smartqos_policy general
  • change smartqos_template
  • create smartqos_template
  • delete lun_destroy_data
  • delete smartqos_policy
  • remove smartqos_policy lun
  • show ib_port count
  • show lun_destroy_data upgrade_status
  • show reduction general
  • show schedule
  • show smartqos_policy general
  • add mirror_lun local_mirror_copy
  • create lun_destroy_data
  • show snapshot general
  • show lun_migration general
  • show clone general
  • add clone secondary_lun
  • change clone restore
  • change clone synchronize
  • add lun_copy other_vendor_target
  • change lun_migration_split consistency
  • create lun_migration
  • delete clone
  • delete lun_migration
  • remove clone secondary_lun
  • show smartqos_policy snapshot
  • change remote_device general
  • show performance smartqos_policy
  • change storage_pool general
  • show storage_engine
  • show cache_partition general
  • show event
  • show alarm
  • change cli
  • change safe_strategy
  • show performance consistency_group
  • remove lun_copy other_vendor_target
  • change system timezone
  • create smartqos_policy
  • change clone split
  • create lun_group
  • change mapping_view
  • add mapping_view lun_group
  • remove consistency_group remote_replication
  • change consistency_group general
  • change port fc
  • create snapshot general
  • show vstore
  • show quorum_server general
  • change quorum_server general
  • show clone secondary_lun
  • create remote_replication_vstore general
  • create remote_replication_vstore verification_session
  • change remote_replication_vstore general
  • change remote_replication_vstore split
  • change remote_replication_vstore synchronize
  • swap remote_replication_vstore
  • delete remote_replication_vstore general
  • change service ndmp_restart_service
  • show performance lun
  • change service http
  • add cache_partition file_system
  • add logical_port ipv4_route
  • add logical_port ipv6_route
  • add quorum_server_link general
  • change antivirus pre_shared_key
  • change audit_strategy
  • change cache_partition general
  • change clone general
  • change clone secondary_lun
  • change common_config cifs
  • change common_config nfs
  • change failover_group general
  • change icmp switch
  • change logical_port failover_group
  • change lun_migration
  • change service cifs_config
  • change share_permission ftp
  • change system permission_hardening
  • create audit log
  • create clone
  • create quorum_server general
  • create share_permission ftp
  • create storage_pool
  • delete audit log_files
  • delete disk_domain
  • delete quorum_server general
  • delete share_permission ftp
  • delete smartqos_template
  • remove logical_port ipv4_route
  • remove logical_port ipv6_route
  • remove lun_group lun
  • remove quorum_server_link general
  • show antivirus config
  • show audit_strategy
  • show cache_partition file_system
  • show common_config cifs
  • show common_config nfs
  • show file_system file_handle
  • show logical_port route
  • show lun_copy member
  • show lun_migration count
  • show lun_takeover general
  • show performance cifs_service
  • show performance nfsv3
  • show performance nfsv4
  • show performance smb1
  • show performance smb2
  • show quorum_server_link general
  • show service cifs_config
  • show service ftp
  • show service http
  • show service ndmp_tape
  • show share_permission ftp
  • show share_permission ftp_count
  • show smartqos_policy lun
  • show smartqos_template
  • show system server_port
  • show system write_through_policy
  • show vlan count
  • add notification trap
  • create remote_replication general
  • change call_home general
  • change remote_replication_vstore local_vstore_port_status
  • change notification trap
  • create lun_takeover general
  • show performance file
  • create failover_group general
  • show port general
  • change initiator
  • remove failover_group vlan_port
  • add failover_group vlan_port
  • change service ndmp_scanbus
  • change service ftp
  • change antivirus config
  • create vstore general
  • change vstore info
  • delete vstore general
  • show performance file_system
  • change notification email_extend
  • change smtp_server config
  • delete logical_port general
  • change ftds switch
  • change remote_replication general
  • create consistency_group asynchronization
  • change snapshot description
  • change snapshot capacity
  • show remote_replication_vstore general
  • change hyper_metro_pair priority
  • show hyper_metro_domain general
  • add hyper_metro_domain quorum_server
  • change hyper_metro_domain general
  • delete hyper_metro_domain general
  • remove hyper_metro_domain quorum_server
  • create hyper_metro_domain general
  • add hyper_metro_consistency_group pair
  • change hyper_metro_consistency_group synchronize
  • change hyper_metro_consistency_group pause
  • change hyper_metro_consistency_group priority
  • change hyper_metro_consistency_group start
  • create hyper_metro_consistency_group verification_session
  • remove hyper_metro_consistency_group pair
  • delete hyper_metro_consistency_group
  • create hyper_metro_consistency_group general
  • change hyper_metro_consistency_group general

文档版本 05 (2018-01-30)

第五次正式发布。

新增命令:
  • show performance smart_cache_partition
  • add failover_group fc_port
  • remove failover_group fc_port
  • show failover_group fc_port
  • change service ndmp_scanbus
  • show assistant_cooling_unit
  • export event
  • change system kernel_security_patch
  • show system kernel_security_patch
修改命令:
  • change smtp_server config
  • show performance restore
  • change snmp version
  • show event_restore
  • show diagnose_code
  • change system write_through_policy
  • show notification trap
  • create ib_initiator general
  • change ib_initiator general
  • change initiator
  • change performance restore
  • show host reachable
  • create initiator iscsi
  • change snmp usm
  • show kmc general
  • export kms key
  • change snmp safe_strategy
  • change vstore info
  • delete vstore general
  • create vstore general
  • show persistent_mirror silence_time
  • change persistent_mirror silence_time
  • show notification syslog
  • import ssl_certificate
  • test call_home service
  • show port general
  • change service ftp
  • change hyper_metro_pair general
  • change hyper_metro_consistency_group general
  • change ntp_server config
  • change system ntp
  • add failover_group bond_port
  • add failover_group eth_port
  • add failover_group vlan_port
  • change disk erase
  • change event_restore enabled
  • change lun_copy session
  • change user_session number
  • create failover_group general
  • create hyper_metro_consistency_group general
  • create initiator fc
  • delete failover_group general
  • import ssh_host_key_file
  • remove failover_group bond_port
  • remove failover_group eth_port
  • remove failover_group vlan_port
  • show event_config
  • show performance file
  • show performance statistic_enabled
  • show performance strategy
  • show snmp context_name
  • show system general
  • show upgrade package
  • change snmp community
  • delete virtual_machine general
  • export running_data
  • show file export_path
  • show file package_result
  • delete file
  • show file notification
  • export performance file
  • export cli history
  • change event_config
  • change notification email_extend
  • change performance strategy
  • add failover_group fc_port
  • change system kernel_security_patch
  • show system kernel_security_patch

文档版本 04 (2017-11-30)

第四次正式发布。

新增命令:
  • change remote_support general
  • show remote_support technical_support_center
  • change call_home authenticate
  • test call_home service
  • show remote_support general
  • clear remote_support proxy_user_password
  • change call_home general
  • show call_home general
  • change service ndmp_restart_service
  • change ntp_server config
  • change system ntp
  • show ntp_server general
  • show system ntp
  • test ntp_server general
  • change notification trap
  • change iostat policy
修改命令:
  • delete failover_group general
  • remove failover_group bond_port
  • remove failover_group eth_port
  • remove failover_group vlan_port
  • show file_system file_handle
  • show antivirus statistic
  • delete antivirus statistic
  • add cache_partition lun
  • add failover_group bond_port
  • add failover_group eth_port
  • add failover_group vlan_port
  • add hyper_metro_domain quorum_server
  • change disk_domain general
  • change hyper_metro_pair priority
  • change cache_partition general
  • change disk precopy
  • change enclosure light
  • change failover_group general
  • change mm_user synchronize
  • add smartqos_policy file_system
  • change performance statistic_enabled
  • change storage_pool reconstruction_speed
  • change system name
  • create cache_partition
  • delete ldap configuration
  • create mirror_lun
  • delete hyper_metro_vstore_pair general
  • delete iscsi target
  • delete mirror_lun
  • create failover_group general
  • create hyper_metro_domain general
  • delete quorum_server general
  • delete smartqos_template
  • delete vlan general
  • add cache_partition file_system
  • change lun_migration
  • change mm_user user_name
  • change performance strategy
  • remove mirror_lun mirror_copy
  • remove quorum_server_link general
  • show cache_partition lun
  • show disk_domain available_capacity
  • show notification email_extend
  • show notification receiver
  • change snmp community
  • change system location
  • create clone
  • create vlan general
  • delete cache_partition
  • delete hyper_metro_domain general
  • delete role general
  • export logfile
  • remove hyper_metro_domain quorum_server
  • show disk precopy
  • show disk_domain lun
  • show lun_migration count
  • show performance bond_port
  • show performance remote_replication
  • show smartqos_policy file_system
  • show smartqos_template
  • show snmp safe_strategy
  • show upgrade package
  • remove smartqos_policy file_system
  • show bbu life
  • show cache_partition file_system
  • show isns server_ip
  • show ldap configuration
  • show mm_user general
  • show performance controller
  • show performance lun
  • show system manufactory
  • show disk bad_sector_record
  • show disk in_domain
  • show iostat policy
  • show performance system
  • show ssd routeswitch
  • show storage_pool reconstruction_speed
  • show storage_pool tier
  • show system server_port
  • show performance port
  • show remote_vstore general
  • show server_info
  • show server_ip
  • show disk_domain securevideo
  • show tls_cert
  • show white_list
  • show cli configuration
  • change protocol service
  • change notification sms
  • show performance logical_port
  • change user_mode current_mode
  • show alarm_mask
  • show alarm_object
  • show host_group host
  • change schedule
  • change snapshot cancel_restore
  • change service ndmp_scanbus
  • delete schedule
  • show host snapshot
  • show lun_group snapshot
  • show notification sms
  • show snapshot available_lun
  • add mapping_view host_group
  • add mapping_view port_group
  • remove mapping_view port_group
  • remove mapping_view lun_group
  • change system client_name
  • show mapping_view host_group
  • show lun_group general
  • show mapping_view lun_group
  • show port_group mapping_view
  • show lun_group mapping_view
  • show host_group mapping_view
  • show port_group general
  • show port initiator
  • show port_group port
  • show mapping_view port_group
  • show vlan general
  • show vlan count
  • add port_group port
  • change host_group general
  • remove mapping_view host_group
  • show controller io
  • show host host_group
  • show lun lun_group
  • show lun_group lun
  • show snapshot lun_group
  • show notification email
  • show performance statistic_enabled
  • show performance strategy
  • delete file
  • change ssd routeswitch
  • show service cifs_config
  • show system write_through_policy
  • show license
  • show license_active
  • show lun_copy member
  • change clone general
  • show lun_copy general
  • show lun mapping_view
  • show snmp usm
  • show snmp context_name
  • create port_group
  • show host lun
  • show snmp port
  • show system permission_hardening
  • add remote_device link fc
  • export event
  • export performance file
  • show performance nfsv3
  • show performance nfsv4
  • show performance nfs_share
  • delete logical_port general
  • remove logical_port ipv4_route
  • remove logical_port ipv6_route
  • add logical_port ipv6_route
  • add logical_port ipv4_route
  • change logical_port failover_group
  • change alarm clear
  • change event_config
  • change event_restore enabled
  • show performance file_system
  • show notification syslog
  • show system media_scan
  • change system media_scan
  • remove role permit
  • add virtual_machine block
  • add virtual_machine port
  • add virtual_machine vmtools
  • change vm_file transference
  • create vm_template general
  • change virtual_machine failback_switch
  • delete vm_template general
  • delete vmtools general
  • pause virtual_machine
  • reboot virtual_machine
  • remove virtual_machine vm_iso
  • add virtual_machine vm_iso
  • poweroff virtual_machine
  • remove virtual_machine block
  • delete virtual_machine general
  • delete vm_iso general
  • remove virtual_machine port
  • show virtual_machine vcpu_isolate_switch
  • remove virtual_machine vmtools
  • show vhba general
  • show virtual_machine block
  • show vm_file transference_status
  • show vm_template general
  • resume virtual_machine
  • scan virtual_machine block
  • show virtual_machine failback_switch
  • show vm_file transference_path
  • show vmtools general
  • show vm_container general
  • show vm_fs general
  • show virtual_machine general
  • show vm_iso general
  • upgrade virtual_machine vmtools
  • create virtual_machine failback_session
  • create virtual_machine general
  • change virtual_machine general
  • add virtual_machine secondary_port
  • poweron virtual_machine
  • show vm_service general
  • show service ndmp_tape
  • change mm_user password
  • add role permit
  • change system permission_hardening
  • change system server_port
  • change hyper_metro_vstore_pair start
  • change role general
  • show service nfs_config
  • show file package_result
  • show file notification
  • change ssl_certificate passphrase
  • show system timezone
  • change audit_strategy
  • show clone secondary_lun
  • show disk format
  • show event_config
  • show quorum_server_link general
  • show smartqos_policy lun
  • show virtual_machine port
  • add disk_domain disk
  • delete hyper_metro_consistency_group
  • add hyper_metro_consistency_group pair
  • change hyper_metro_consistency_group synchronize
  • change hyper_metro_consistency_group priority
  • change hyper_metro_consistency_group pause
  • change hyper_metro_consistency_group start
  • remove hyper_metro_consistency_group pair
  • create hyper_metro_consistency_group verification_session
  • show performance file
  • show audit_strategy
  • create initiator fc
  • change host
  • show file export_path
  • change disk erase
  • show system general
  • add smart_cache_pool disk
  • create smart_cache_partition
  • delete smart_cache_partition
  • remove smart_cache_partition file_system
  • remove smart_cache_partition lun
  • show smart_cache_partition file_system
  • show smart_cache_partition lun
  • show smart_cache_partition general
  • show smart_cache_pool disk
  • show smart_cache_pool general
  • add smart_cache_partition file_system
  • add smart_cache_partition lun
  • change smart_cache_partition general
  • change storage_pool analysis
  • change storage_pool relocation_speed
  • create schedule relocate
  • create schedule monitor
  • change storage_pool relocation_schedule
  • change storage_pool ssd_enabled
  • show storage_pool ssd_enabled
  • show storage_pool analysis_configuration
  • show storage_pool relocation_speed
  • show storage_pool analysis_result
  • show performance smb2
  • show performance smb1
  • show performance cifs_share
  • create audit log
  • change user_session number
  • change hyper_metro_consistency_group general
  • create hyper_metro_consistency_group general
  • show performance cache_partition
  • show performance cifs_service
  • show performance nfs_service
  • change user_ssh_auth_info general
  • remove lun_takeover general
  • show lun_takeover general
  • change clone secondary_lun
  • remove lun_group lun
  • remove port ipv4_address
  • remove port ipv6_address
  • change system secure_compliance_clock
  • change notification email
  • delete audit log_files
  • create host
  • create ldap configuration
  • delete disk_domain
  • change disk_domain rekey
  • create disk_domain
  • change ldap configuration
  • change lun_copy session
  • remove smart_cache_pool disk
  • change antivirus pre_shared_key
  • change antivirus config
  • show antivirus config
  • export configuration_data
  • change hyper_metro_domain general
  • restore ssl_certificate
  • create hyper_metro_vstore_pair general
  • show common_config nfs
  • change common_config nfs
  • delete share_permission ftp
  • show share_permission ftp
  • change share_permission ftp
  • change service cifs_config
  • change common_config cifs
  • show common_config cifs
  • create share_permission ftp
  • show share_permission ftp_count
  • create storage_pool
  • create fs_clone general
  • show fs_clone general
  • create ldap authconfig
  • add notification trap
  • change notification trap
  • change notification email_extend
  • import ssh_host_key_file
  • change fs_clone split
  • show hyper_metro_vstore_pair check_session
  • change service nfs_config
  • create quorum_server general
  • create role general
  • change user_password
  • change consistency_group synchronize
  • show remote_replication general
  • create remote_replication general
  • swap hyper_metro_vstore_pair worksite
  • show security_rule
  • change hyper_metro_vstore_pair general
  • poweron interface_module
  • change port eth
  • show port route
  • show bbu general
  • change icmp switch
  • change performance threshold
  • show user_session number
  • show upgrade redundant_link
  • change notification syslog
  • show hyper_metro_vstore_pair general
  • show logical_port route
  • change vlan general
  • change service http
  • show service http
  • export running_data
  • show user_ssh_auth_info general
  • show system config_model
  • export cli history
  • show cli history
  • show system secure_compliance_clock
  • show disk health
  • change remote_replication_vstore local_vstore_port_status
  • change call_home authenticate
  • show remote_support general
  • change call_home general
  • add quorum_server_link general
  • change service ftp
  • show service ftp
  • create lun_takeover general
  • show disk_domain available_capacity
  • add mapping_view port_group
  • change call_home authenticate
  • change call_home general
  • change disk_domain rekey
  • delete role general
  • show file package_result
  • show file notification
  • delete file
  • change service http
  • show service ftp
  • create lun_takeover general
  • show disk_domain available_capacity
  • add virtual_machine vmtools
  • create virtual_machine general
  • change virtual_machine general
  • show service cifs_config
  • change service cifs_config
  • show lun_takeover general
  • show ntp_server general
  • create disk_domain
  • create smart_cache_partition
  • change smart_cache_partition general
  • show performance system
  • export event
  • change notification email
  • delete file
  • show file notification
  • change event_config
  • change hyper_metro_vstore_pair general
  • change hyper_metro_vstore_pair start
  • change performance strategy
  • change remote_replication_vstore local_vstore_port_status
  • create hyper_metro_vstore_pair general
  • delete hyper_metro_vstore_pair general
  • export performance file
  • show hyper_metro_vstore_pair check_session
  • show hyper_metro_vstore_pair general
  • swap hyper_metro_vstore_pair worksite
  • show file export_path
  • show file package_result
  • show file notification
  • delete file
  • change call_home authenticate
  • export event
  • show file export_path
  • show file package_result
  • show file notification
  • delete file
  • change notification trap
  • change call_home general
  • show file package_result
  • show file notification
  • delete file
  • show file notification
  • delete file
删除命令:
  • change notification trap

文档版本 03 (2017-08-30)

第三次正式发布。

删除第三方工具的下载链接。

文档版本 02 (2017-06-01)

第二次正式发布。

增加、修改和删除相关命令。

文档版本 01 (2017-02-28)

第一次正式发布。

翻译
English
下载文档
更新时间:2018-06-22

文档编号:EDOC1000138399

浏览量:8340

下载量:652

平均得分:
本文档适用于这些产品
相关文档
分享
上一页 下一页