所选语种没有对应资源,请选择:

本站点使用Cookies,继续浏览表示您同意我们使用Cookies。Cookies和隐私政策>

提示

尊敬的用户,您的IE浏览器版本过低,为获取更好的浏览体验,请升级您的IE浏览器。

升级

OceanStor Dorado V3系列 V300R001 命令参考

"本产品文档适用于OceanStor Dorado5000 V3, Dorado6000 V3和Dorado18000 V3。本文档针对DeviceManager管理软件提供的CLI(Command Line Interface)命令行,介绍 如何使用CLI设置、管理存储系统,以及按功能分类详细介绍各命令的使用方法。 在线浏览的文档仅配套该产品已经发布的最新C版本。如需获取其他C版本的文档,请单击“下载文档”进行获取。"
评分并提供意见反馈 :
华为采用机器翻译与人工审校相结合的方式将此文档翻译成不同语言,希望能帮助您更容易理解此文档的内容。 请注意:即使是最好的机器翻译,其准确度也不及专业翻译人员的水平。 华为对于翻译的准确性不承担任何责任,并建议您参考英文文档(已提供链接)。
前言

前言

概述

本文档针对DeviceManager管理软件提供的CLI(Command Line Interface)命令行,介绍如何使用CLI设置、管理存储系统,以及按功能分类详细介绍各命令的使用方法。

本文档适用的产品型号如下所示。

产品系列

产品型号

OceanStor Dorado V3系列

Dorado5000 V3

Dorado6000 V3

Dorado18000 V3

读者对象

本文档主要适用于以下工程师:

  • 技术支持工程师
  • 维护工程师

文档约定

您购买的产品、服务或特性等应受华为技术有限公司商业合同和条款的约束,本文档中描述的全部或部分产品、服务或特性可能不在您的购买或使用范围之内。除非合同另有约定,华为技术有限公司对本文档内容不做任何明示或默示的声明或保证。

作为改善和增强产品性能和功能的一部分,华为技术有限公司会定期发布本产品硬件与软件的修订版。因此,对于当前使用的所有软件或硬件版本,本文档中介绍的一些功能可能不被支持。有关产品功能的最新信息,请参见相关产品的发行说明。

如果某产品的功能与本文档的描述不符,请与华为技术支持工程师联系。

修改记录

修改记录累积了每次文档更新的说明。最新版本的文档包含以前所有文档版本的更新内容。

文档版本 09 (2018-08-30)

第九次正式发布。

在“CLI使用说明”章节增加使用SSH远端下发CLI命令至阵列的描述。

文档版本 08 (2018-07-15)

第八次正式发布。

新增命令:

  • test dns_server general

修改命令:

  • change isns server_ip
  • change snmp port
  • create mapping_view
  • show remote_lun general
  • show performance system
  • add bond_port ipv6_route
  • delete bond_port
  • change devicemanager tls
  • change system name
  • add mapping_view host_group
  • show performance snapshot
  • show performance smartqos_policy
  • show consistency_group general
  • show performance remote_replication
  • show performance consistency_group
  • show port fibre_module
  • show dns_server general
  • change dns_server general
  • change notification syslog
  • show remote_replication general
  • change notification sms
  • remove notification receiver
  • change alarm_object_mask
  • create remote_replication unified
  • add mapping_view lun_group
  • show performance controller
  • show performance port
  • change cli
  • change mapping_view
  • show performance ib_port
  • show port bit_error
  • show performance bond_port
  • show performance lun
  • add bond_port ipv4_route
  • change snmp usm
  • change system write_policy
  • add port ipv6_route
  • add port ipv4_route
  • create quorum_server general
  • create consistency_group asynchronization
  • show performance disk_domain
  • show disk_domain available_capacity
  • show performance elink
  • show isns server_ip
  • show remote_device general
  • show remote_device link
  • show remote_replication unified
  • change system location
  • show port initiator
  • show performance link
  • show notification syslog
  • change notification trap
  • export running_data
  • create remote_replication general
  • change disk_domain general
  • show initiator
  • show performance host
  • show performance storage_pool
  • create storage_pool
  • show storage_pool general
  • show performance disk
  • create remote_device general
  • change smtp_server config
  • change lun
  • change quorum_server general
  • show port general
  • change initiator
  • show performance lun_priority

文档版本 07 (2018-04-03)

第七次正式发布。

新增命令:

  • delete lun_copy
  • change lun_copy general
  • create lun_copy local
  • change lun_copy session
  • show lun_copy general
  • delete snapshot_schedule
  • show snapshot_schedule lun
  • remove snapshot_schedule lun
  • change snapshot_schedule general
  • show snapshot_schedule general
  • create snapshot_schedule general
  • change snapshot_schedule enabled
  • add snapshot_schedule lun
  • create failover_group general
  • add failover_group bond_port
  • add failover_group eth_port
  • add failover_group fc_port
  • remove failover_group fc_port
  • remove failover_group bond_port
  • remove failover_group eth_port
  • delete failover_group general
  • change failover_group general
  • show failover_group general
  • show failover_group count
  • show failover_group member
  • show failover_group fc_port
  • change snapshot description

修改命令:

  • change iostat policy
  • delete snmp usm
  • exit
  • show mm_user general
  • show storage_pool general
  • delete performance file
  • change snapshot reactivate
  • show performance storage_pool
  • change system time
  • change system timezone
  • show alarm
  • test call_home service
  • change snapshot deactivate
  • show hyper_metro_domain general
  • create lun_group
  • change initiator
  • change ib_initiator general
  • create initiator iscsi
  • create initiator fc
  • create ib_initiator general
  • change snapshot name
  • change port fc
  • create snapshot general
  • show snapshot available_snapshot
  • show ib_initiator general
  • change snapshot capacity
  • change snapshot io_priority
  • change storage_pool general
  • change remote_support general
  • add quorum_server_link general
  • show disk_domain general
  • create disk_domain
  • create hyper_metro_pair unified
  • change hyper_metro_pair general
  • change hyper_metro_consistency_group general
  • create remote_device general
  • create hyper_metro_consistency_group general
  • change lun
  • show lun_clone available_snapshot
  • delete lun_copy
  • change lun_copy general
  • create lun_copy local
  • change lun_copy session
  • show lun_copy general
  • show initiator
  • change quorum_server general
  • create lun
  • show port general
  • change disk_domain general
  • show system dst
  • show performance file
  • show bond_port
  • show performance host
  • change snapshot restore
  • change snmp version
  • change consistency_group synchronize
  • change remote_device link
  • add remote_device link iscsi
  • show performance disk
  • show event
  • show diagnose_code
  • change call_home general
  • change disk erase
  • create storage_pool
  • show snapshot general
  • show lun general
  • remove snapshot_schedule lun
  • change snapshot_schedule general
  • show snapshot_schedule general
  • create snapshot_schedule general
  • change snapshot description

文档版本 06 (2017-12-30)

第六次正式发布。

新增命令:

  • show lun_clone general
  • change lun_clone split
  • create lun_clone general
  • show lun_clone available_lun
  • show replication_connection_status general
  • show lun_clone available_snapshot

修改命令:

  • show lun_migration count
  • show host_group mapping_view
  • show host_group general
  • show host_group host
  • show port_group mapping_view
  • show port_group general
  • show mapping_view host_group
  • show mapping_view lun_group
  • show mapping_view port_group
  • show iscsi initiator_name
  • show iscsi target_name
  • show snmp context_name
  • show isns server_ip
  • show system timezone
  • show system media_scan
  • poweroff interface_module
  • poweron interface_module
  • show port ip
  • show port route
  • show fan
  • show bbu general
  • show enclosure
  • show disk precopy
  • show iscsi target
  • change remote_device link
  • add remote_device link iscsi
  • show remote_device general
  • show power_supply
  • show system manufactory
  • show mapping_view general
  • show iscsi initiator_name_v2
  • show system general
  • show disk_domain lun
  • change disk_domain general
  • add disk_domain disk
  • show system dst
  • show notification email
  • show notification sms
  • show remote_lun path
  • show snmp port
  • change snmp version
  • show event
  • show disk_domain task
  • create alarm test
  • show performance statistic_enabled
  • show performance strategy
  • change performance strategy
  • show performance restore
  • change remote_device general
  • show remote_device elink
  • show bond_port
  • show performance elink
  • show performance lun_priority
  • change system location
  • show upgrade package
  • show cache read_cache
  • show version all
  • change smtp_server config
  • import license
  • show route general
  • show ib_port general
  • delete notification trap
  • change hyper_metro_consistency_group pause
  • change hyper_metro_pair pause
  • show disk in_domain
  • change event_restore enabled
  • show diagnose_code
  • show event_config
  • show event_restore
  • show performance file
  • show performance host
  • show performance link
  • change performance restore
  • show disk_domain available_capacity
  • add notification trap
  • change notification trap
  • export license
  • show user
  • show host reachable
  • change safe_strategy
  • show remote_replication unified
  • change disk erase
  • export kms key
  • show kmc general
  • show certificate general
  • change hyper_metro_pair general
  • show quorum_server general
  • show hyper_metro_consistency_group general
  • export performance file
  • export running_data
  • show remote_support general
  • show notification syslog
  • export configuration_data
  • change event_config
  • show notification trap
  • show user_mode enabled
  • change user_mode enabled
  • change notification email_extend
  • change event_restore address
  • change ntp_server config
  • change system ntp
  • import certificate
  • show performance disk
  • show expansion_module
  • show lun_group mapping_view
  • show smartqos_policy general
  • show interface_module
  • show controller general
  • import ssl_certificate
  • change security_rule enabled
  • export certificate
  • change consistency_group synchronize
  • change quorum_server general
  • change lun_workload_type general
  • change disk_domain rekey
  • show host general
  • show smartqos_policy hierarchical
  • show smartqos_policy lun
  • show smartqos_policy snapshot
  • change snapshot speed
  • import crl file
  • show remote_device link
  • delete disk_domain
  • change snapshot restore
  • show disk_domain general
  • show lun_takeover general
  • create remote_replication general
  • create hyper_metro_pair unified
  • create hyper_metro_consistency_group general
  • change hyper_metro_consistency_group general
  • show snmp usm
  • show initiator
  • show disk general
  • change snmp community
  • change lun
  • change call_home general
  • change call_home authenticate
  • export event
  • create disk_domain
  • delete file
  • show file export_path
  • show file notification
  • show file package_result
  • import ssh_host_key_file
  • change user_mode current_mode
  • show port general
  • create port_group
  • remove port_group port
  • show port_group port
  • create remote_device general
  • show port initiator
  • show performance disk_domain
  • create snapshot_schedule general
  • change snapshot_schedule general
  • show lun general
  • show snapshot general
  • show disk_domain lun
  • change disk_domain general
  • add disk_domain disk
  • show disk_domain task
  • show disk_domain available_capacity
  • change disk_domain rekey
  • delete disk_domain
  • export cli history
  • create lun
  • create storage_pool
  • change call_home general
  • show file notification
  • show certificate general
  • export running_data
  • add remote_device link iscsi
  • change remote_device link
  • change lun
  • show lun_clone general
  • change lun_clone split
  • create lun_clone general
  • change quorum_server general
  • import certificate
  • show performance disk_domain
  • show lun general
  • change performance strategy
  • export configuration_data
  • export license
  • export event
  • import license
  • export performance file
  • show upgrade package
  • change lun_clone split
  • export cli history
  • show controller general
  • import ssl_certificate
  • show port general
  • show ib_port general
  • import certificate
  • export certificate
  • import crl file
  • show port initiator
  • export kms key
  • create storage_pool
  • show mapping_view general
  • show controller general
  • add disk_domain disk
  • show system general
  • show disk general
  • show performance restore
  • show upgrade package
  • create storage_pool
  • show user
  • show disk in_domain
  • show lun general
  • show remote_replication unified
  • show quorum_server general
  • show event_restore
  • change snmp community
  • change event_restore address
  • show controller general
  • show remote_device general
  • show remote_device link
  • show performance lun_priority
  • show lun general
  • export cli history
  • show disk in_domain
  • export configuration_data
  • export performance file
  • export running_data
  • change performance restore
  • change performance strategy
  • change smtp_server config
  • change notification email_extend
  • change call_home general
  • create remote_replication general

删除命令:

  • delete snapshot_schedule
  • remove snapshot_schedule lun
  • change snapshot_schedule enabled
  • show snapshot_schedule general
  • add snapshot_schedule lun
  • show snapshot_schedule lun
  • create snapshot_schedule general
  • change snapshot_schedule general

文档版本 05 (2017-11-10)

第五次正式发布。

新增命令:

  • change system write_policy
  • show system write_policy
  • show upgrade redundant_link
  • change devicemanager ciphersuite
  • show quorum_server_link general
  • delete quorum_server general
  • add quorum_server_link general
  • remove quorum_server_link general
  • create quorum_server general

修改命令:

  • show port_group port
  • show port initiator
  • show snmp safe_strategy
  • add remote_device link fc
  • change lun_migration
  • show remote_device link
  • show snmp version
  • change snmp community
  • remove bond_port ipv4_address
  • create remote_device general
  • create lun_migration
  • create port_group
  • show snmp usm
  • change snmp usm
  • add snmp usm
  • show disk general
  • create consistency_group synchronization
  • change consistency_group general
  • create consistency_group asynchronization
  • change remote_replication general
  • change call_home general
  • show port general
  • change hyper_metro_consistency_group general
  • create hyper_metro_consistency_group general
  • create hyper_metro_pair unified
  • show disk general
  • change remote_support general
  • change call_home authenticate
  • show file package_result
  • delete file
  • change snapshot capacity
  • show ib_initiator general
  • show initiator
  • create disk_domain
  • import ssh_host_key_file
  • show file notification
  • change user_mode current_mode
  • show file export_path
  • export event
  • create remote_replication general
  • remove port_group port
  • add smartqos_policy hierarchical
  • change snapshot io_priority
  • show crl general
  • add port ipv4_route
  • add port ipv6_route
  • change storage_pool general
  • change lun
  • show user_ssh_auth_info general
  • change lun
  • create lun_takeover general
  • show snapshot available_snapshot
  • create snapshot general
  • change snapshot capacity
  • change snapshot cancel_restore
  • create consistency_group synchronization
  • create consistency_group asynchronization
  • change consistency_group general
  • show port initiator
  • change snapshot cancel_restore
  • change system write_policy
  • change snapshot capacity
  • change snapshot io_priority
  • change consistency_group general

删除命令:

  • show system write_through_policy
  • export call_home_collector information_file
  • change system write_through_policy

文档版本 04 (2017-09-11)

第四次正式发布。

新增命令:

  • change devicemanager ciphersuite
  • show initiator
  • change initiator
  • create initiator iscsi
  • create initiator fc
  • create ib_initiator general
  • show ib_port general
  • show ib_initiator general
  • delete hyper_metro_pair general
  • change hyper_metro_pair synchronize
  • create hyper_metro_pair unified
  • change hyper_metro_pair start
  • change hyper_metro_pair priority
  • change hyper_metro_pair general
  • change hyper_metro_pair pause
  • create hyper_metro_pair verification_session
  • show hyper_metro_pair general
  • show hyper_metro_consistency_group pair
  • create hyper_metro_consistency_group verification_session
  • show hyper_metro_consistency_group general
  • delete hyper_metro_consistency_group
  • change hyper_metro_consistency_group priority
  • remove hyper_metro_consistency_group pair
  • change hyper_metro_consistency_group synchronize
  • change hyper_metro_consistency_group pause
  • add hyper_metro_consistency_group pair
  • change hyper_metro_consistency_group start
  • create hyper_metro_consistency_group general
  • change hyper_metro_consistency_group general
  • change ib_initiator general
  • change host
  • add kmc test
  • show kmc general
  • add kmc general
  • delete kmc general
  • delete white_list
  • show white_list
  • change white_list
  • export tls_cert
  • show tls_cert
  • delete server_ip
  • import tls_cert
  • show server_ip
  • show server_info
  • add server_ip
  • add white_list
  • create quorum_server general
  • show quorum_server general
  • remove quorum_server_link general
  • add quorum_server_link general
  • change quorum_server general
  • show quorum_server_link general
  • delete quorum_server general
  • change snapshot restore
  • create hyper_metro_domain general
  • delete hyper_metro_domain general
  • remove hyper_metro_domain quorum_server
  • add hyper_metro_domain quorum_server
  • show snapshot general
  • show snapshot available_snapshot
  • create user
  • create disk_domain
  • show user_mode enabled
  • change user_mode enabled
  • show user
  • show remote_replication general
  • create lun_takeover general
  • change user_mode current_mode
  • change snapshot cancel_restore
  • change alarm_object_mask
  • remove notification receiver
  • add notification receiver
  • change notification email_extend
  • change notification email
  • change notification sms
  • add host ib_initiator
  • add host initiator
  • show enclosure
  • add consistency_group remote_replication
  • create remote_replication general
  • create remote_replication unified
  • change remote_replication split
  • create consistency_group asynchronization
  • create host
  • change disk_domain rekey
  • change event_config
  • remove mapping_view port_group
  • change system write_policy
  • show system write_policy
  • change system write_through_policy
  • show system write_through_policy
  • change remote_replication general
  • swap consistency_group
  • add lun_group lun
  • add snmp usm
  • change snmp usm
  • show snmp safe_strategy
  • show port initiator

修改命令:

  • change ssd routeswitch
  • change snmp port
  • change lun_migration
  • change alarm_mask
  • show license
  • change bond_port ipv6_address
  • change snapshot deactivate
  • create lun_migration
  • show ntp_server general
  • show system ntp
  • show cli history
  • export cli history
  • change ntp_server config
  • show snapshot available_lun
  • add smtp_server general
  • show notification syslog
  • show disk health
  • change disk routine_test
  • show performance bond_port
  • show performance port
  • create remote_device general
  • import ssl_certificate
  • show lun_cache general
  • change system ntp
  • change notification syslog
  • show notification trap
  • change performance threshold
  • show performance lun
  • create lun
  • change user_ssh_auth_info general
  • show user_ssh_auth_info general
  • change certificate password
  • change certificate prewarning_time
  • show certificate general
  • export certificate
  • change bond_port ipv4_address
  • change interface_module
  • change port ipv6_address
  • change port ipv4_address
  • show disk general
  • create consistency_group verification_session
  • change consistency_group general
  • change disk erase
  • show port general
  • show port bit_error
  • export configuration_data
  • show lun mapping_view
  • change controller smartport_work_mode
  • remove smtp_server general
  • test smtp_server general
  • test ntp_server general
  • add ntp_server general
  • remove ntp_server general
  • change user
  • import certificate
  • create storage_pool
  • show controller general
  • change system management_ip
  • test ntp_server general
  • import certificate
  • export event
  • show interface_module
  • show disk_domain general
  • show security_rule
  • show initiator
  • change initiator
  • create initiator iscsi
  • create initiator fc
  • create ib_initiator general
  • show ib_initiator general
  • delete hyper_metro_pair general
  • create hyper_metro_pair unified
  • show hyper_metro_pair general
  • show hyper_metro_consistency_group general
  • show disk general
  • show port general
  • change system management_ip
  • change bond_port ipv6_address
  • create hyper_metro_pair unified
  • change ib_initiator general
  • change host
  • add kmc test
  • change user
  • create hyper_metro_pair unified
  • show quorum_server general
  • show quorum_server_link general
  • create hyper_metro_pair unified
  • create hyper_metro_pair unified
  • show hyper_metro_pair general
  • show cli history
  • change interface_module
  • show interface_module
  • show controller general
  • change controller smartport_work_mode
  • show snapshot available_snapshot
  • create user
  • show user_ssh_auth_info general
  • create disk_domain
  • show remote_replication general
  • show hyper_metro_pair general
  • change user_mode current_mode
  • change notification email_extend
  • change notification email
  • change notification sms
  • show remote_replication general
  • change initiator
  • change ib_initiator general
  • create initiator iscsi
  • create initiator fc
  • create ib_initiator general
  • create remote_replication general
  • create consistency_group asynchronization
  • show remote_replication general
  • change initiator
  • change ib_initiator general
  • change disk_domain rekey
  • create hyper_metro_pair unified
  • show performance lun

删除命令:

  • show user_mode enabled
  • change user_mode enabled
  • change system write_through_policy
  • show system write_through_policy

文档版本 03 (2017-06-30)

第三次正式发布。

新增命令:

  • delete hyper_metro_pair general
  • change hyper_metro_pair synchronize
  • create hyper_metro_pair unified
  • change hyper_metro_pair start
  • change hyper_metro_pair priority
  • change hyper_metro_pair general
  • change hyper_metro_pair pause
  • create hyper_metro_pair verification_session
  • show hyper_metro_pair general
  • show hyper_metro_consistency_group pair
  • create hyper_metro_consistency_group verification_session
  • show hyper_metro_consistency_group general
  • delete hyper_metro_consistency_group
  • change hyper_metro_consistency_group priority
  • remove hyper_metro_consistency_group pair
  • change hyper_metro_consistency_group synchronize
  • change hyper_metro_consistency_group pause
  • add hyper_metro_consistency_group pair
  • change hyper_metro_consistency_group start
  • create hyper_metro_consistency_group general
  • change hyper_metro_consistency_group general
  • import certificate
  • delete white_list
  • show white_list
  • change white_list
  • export tls_cert
  • show tls_cert
  • delete server_ip
  • import tls_cert
  • show server_ip
  • show server_info
  • add server_ip
  • add white_list
  • create quorum_server general
  • show quorum_server general
  • remove quorum_server_link general
  • add quorum_server_link general
  • change quorum_server general
  • show quorum_server_link general
  • delete quorum_server general
  • create hyper_metro_domain general
  • delete hyper_metro_domain general
  • remove hyper_metro_domain quorum_server
  • add hyper_metro_domain quorum_server
  • create snapshot general
  • show snapshot general

修改命令:

  • change user_mode current_mode
  • change snmp port
  • change lun_migration
  • create disk_domain
  • change bond_port ipv6_address
  • create lun_migration
  • show ntp_server general
  • show system ntp
  • show cli history
  • export cli history
  • change ntp_server config
  • show port general
  • change remote_replication general
  • change system ntp
  • create consistency_group asynchronization
  • create remote_replication general
  • show notification trap
  • change performance threshold
  • create lun
  • change bond_port ipv4_address
  • change interface_module
  • change port ipv6_address
  • change port ipv4_address
  • change port fc
  • create consistency_group verification_session
  • change consistency_group general
  • change disk erase
  • change notification syslog
  • add kmc test
  • export configuration_data
  • show lun mapping_view
  • show disk general
  • change user
  • show controller general
  • change system management_ip
  • export event
  • show interface_module
  • change disk_domain rekey
  • show disk_domain general
  • show security_rule
  • create hyper_metro_pair unified
  • show hyper_metro_pair general
  • show hyper_metro_consistency_group general
  • show quorum_server general
  • show quorum_server_link general

文档版本 02 (2017-05-30)

第二次正式发布。

新增Dorado5000的产品型号。

文档版本 01 (2017-03-30)

第一次正式发布。

翻译
下载文档
更新时间:2018-10-19

文档编号:EDOC1000141849

浏览量:9079

下载量:179

平均得分:
本文档适用于这些产品
相关文档
分享
上一页 下一页