所选语种没有对应资源,请选择:

本站点使用Cookies,继续浏览表示您同意我们使用Cookies。Cookies和隐私政策>

提示

尊敬的用户,您的IE浏览器版本过低,为获取更好的浏览体验,请升级您的IE浏览器。

升级

USG2220 URL filtering function doesn't take effect

发布时间:  2012-09-13 浏览次数:  187 下载次数:  0
问题描述
The user opened the URL filtering function, active the license, configured the black/white list, pre-defined the policy and self defined policy, all of them don’t take effect. No policy match. URL filtering function doesn't take effect.
As below:
[USG2200]disp url-filter statistics
19:26:34 2011/08/08
Statistic information about URL filtering
------------------------------------------------------------
Total HTTP requests : 0
Total permitted HTTP requests : 0
Total denied HTTP requests : 0
Match blacklist : 0
Match whitelist : 0
Match user-defined category : 0
Match pre-defined category : 0
Default action : 0
------------------------------------------------------------
告警信息
none
处理过程
1 Make sure that the license for URL filtering function is activated and in the period of validity.
2 make sure the mode of firewall is UTM; check the configuration of each step, make sure that configuration is complete and the policy is correctly applied between the regions.
3 found out the policy 1 is executed, policy 2 no.
4 configure the “policy url-filter worktime” of policy 2 to policy 1, URL filtering function take effect.
根因
1 policy hasn't been submitted after configuration
2 the configuration is un-complete.
3 the mode of firewall isn’t correct.
建议与总结
As long as one policy has been hit, the rests wouldn’t be executed. So we should add all the UTM function in one policy. 

END