OptiXstar P893E
XGS-PON Pro PoE ONU
This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>
This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>
Enterprise products, solutions & services
XGS-PON Pro PoE ONU
OptiXstar P893E
Ultra Wide Access
▪ XGS-PON Pro supports 12.5Gbps
▪ PON upstream load sharing, supporting 25 Gbit/s upstream transmission
▪ 10GE port, PoE++, Wi-Fi 7 AP access
High Reliability，High Security
▪ Type B/Type C service protection
▪ 802.1x authentication、 Firewall、DoS/ARP anti-attacks and other security features
Easy O&M
▪ Centralized management on eSight
▪ Automatic service configuration
Specifications
| Parameters | OptiXstar P893E |
| Dimensions（W×D×H) | 220mm × 150mm × 43.6mm |
| NNI | 2 * XGS-PON Pro（1*BOB+1*SFP） |
| UNI | 4*GE+4*GE(PoE+)+2*XGE(PoE++) |
| Static power consumption | 11.72W |
| Maximum power consumption | 22.37W (excluding PoE power consumption) |
| Installation mode | Placed horizontally on a desktop, installed under a desk, installed on a wall, or installed in a cabinet or network box |
| Operating temperature | -5°C ~ +45°C |
| Heat dissipation mode | Natural heat dissipation |
| PoE output power | Maximum total output power: 120 W GE ports 1–4 do not support PoE GE ports 5–8 support a maximum of 30 W (PoE+) XGE ports 9-10 support a maximum of 60 W (PoE++) |
| XGS-PON Pro port | • Port type: SC/UPC • Maximum transmission distance: 20 km • XGS-PON Pro(BOB) - Class B1(BOB) - Transmission rate: RX 12.4416 Gbit/s, TX 12.4416 Gbit/s - Optical receiver sensitivity: –22 dBm; Overload optical power: –7 dBm • XGS-PON Pro(SFP) - SFP optical module - Class C+(SFP) - Transmission rate：RX 12.4416 Gbit/s, TX 12.4416 Gbit/ - Optical receiver sensitivity: –27 dBm; Overload optical power: –7 dBm |
| GE/XGE(electrical) port | • Port type: RJ45 • GE port: Auto ports speed(10/100/1000 Mbit/s ) • XGE(electrical) port: Auto ports speed(1/2.5/5/10 Gbit/s) • MDI/MDIX automatic configuration • Configuring the number of learnable mac addresses • Ethernet port-based VLAN transparent transmission and filtering • GE ports 5–8 support PoE+XGE supports PoE++ |
| Networking Protection | • Type B single-homing protection • Type B dual-homing protection • Type C single-homing protection • Type C dual-homing protection • PON upstream load sharing |
| Layer 2 Management | • MAC address management • Layer 2 bridging • Layer 2 isolation • DHCP Option82 • PITP • BPDU transparent transmission • LLDP/LLDP-MED • IPv6 (Layer 2 transparent transmission) |
| Security | • 802.1x • IPv6/IPv4 firewall • Filtering based on MAC/IP/URL • Dos/ARP anti-attacks • Static MAC address binding • Device access control • Supports prevention of unauthorized DHCP server connection • ONU Port-Level HardIsolated |