Rate and give feedback:
Connecting Cables
- The fiber connector connected to the optical port on the wall varies depending on actual conditions.
- To ensure normal use of fibers, make sure that the fiber bending radius is larger than 30 mm.
No. |
Item |
Description |
|---|---|---|
1 |
On/Off |
Powers the ONT on or off. |
2 |
Power |
Connects to a power adapter. |
3 |
TEL1-TEL2 |
Connects to the ports on a telephone or fax machine. |
4 |
LAN1-LAN4 |
Connects to PCs or IP set-top boxes (STBs). |
5 |
Optical port |
The optical port is equipped with a rubber plug and connected to a fiber for upstream transmission. The type of the optical connector connected to the optical port can be SC/APC. |
6 |
Reset |
Press the button for a short time to reset the device; or press the button for a long time (longer than 10s) to restore the device to the default settings and reset the device. NOTE:
Reset Huawei ONTs with caution. Otherwise, the ONTs may fail to access the Internet. If an ONT cannot access the Internet after a reset, contact your Internet service provider. |
