ES5D21X08T00 (8-Port 10GBASE-T RJ45 Rear Interface Card) - S5700 Series Switches Hardware Description

S5700 Series Switches Hardware Description

Rate and give feedback:

A Huawei recorreu à tradução automática revista por uma pessoa para traduzir este documento em diferentes idiomas para que os seus utilizadores possam compreender o seu conteúdo. Nota: até mesmo a mais avançada tecnologia de tradução automática não oferece a mesma qualidade proporcionada por um tradutor profissional. A Huawei não se responsabiliza pela precisão da tradução e recomenda a consulta do documento em inglês (cujo link de acesso foi fornecido).

ES5D21X08T00 (8-Port 10GBASE-T RJ45 Rear Interface Card)

Version Mapping

Table 8-140 lists the mapping between the ES5D21X08T00 and software versions.

Table 8-140 Version mapping

Card Model	Software Version
ES5D21X08T00	S5730-HI: V200R012C00 to V200R019C10 versions S5731-H and S5731S-H: V200R019C00 and later versions

Card Model

Software Version

ES5D21X08T00

S5730-HI: V200R012C00 to V200R019C10 versions

S5731-H and S5731S-H: V200R019C00 and later versions

Card Overview

The ES5D21X08T00 provides eight 10GBASE-T RJ45 ports for data access and line-rate switching. It can be installed in a rear card slot of the switch models listed in Table 8-141.

Table 8-141 Applicable switch models

Card	Switch Model
ES5D21X08T00	S5730-36C-HI S5730-44C-HI (can be installed only in slot 1) S5730-36C-PWH-HI S5730-44C-PWH-HI (can be installed only in slot 1) S5730-60C-HI S5730-68C-HI (can be installed only in slot 1) S5730-60C-PWH-HI S5730-68C-PWH-HI (can be installed only in slot 1) S5730-44C-HI-24S (can be installed only in slot 1) S5730-36C-HI-24S S5730-60C-HI-48S S5730-68C-HI-48S (can be installed only in slot 1) S5731-H24T4XC S5731-H24P4XC S5731-H48T4XC S5731-H48P4XC S5731S-H24T4XC-A S5731S-H48T4XC-A S5731-H24HB4XZ S5731-H48HB4XZ S5731S-H24HB4XZ-A S5731S-H48HB4XZ-A

Card

Switch Model

ES5D21X08T00

S5730-36C-HI
S5730-44C-HI (can be installed only in slot 1)
S5730-36C-PWH-HI
S5730-44C-PWH-HI (can be installed only in slot 1)
S5730-60C-HI
S5730-68C-HI (can be installed only in slot 1)
S5730-60C-PWH-HI
S5730-68C-PWH-HI (can be installed only in slot 1)
S5730-44C-HI-24S (can be installed only in slot 1)
S5730-36C-HI-24S
S5730-60C-HI-48S
S5730-68C-HI-48S (can be installed only in slot 1)
S5731-H24T4XC
S5731-H24P4XC
S5731-H48T4XC
S5731-H48P4XC
S5731S-H24T4XC-A
S5731S-H48T4XC-A
S5731-H24HB4XZ
S5731-H48HB4XZ
S5731S-H24HB4XZ-A
S5731S-H48HB4XZ-A

Figure 8-69 ES5D21X08T00 (old)

Figure 8-70 ES5D21X08T00 (new)
Click to enlarge

Functions

Table 8-142 describes functions of the ES5D21X08T00.

Table 8-142 Functions

Function	Description
Basic function	Provides eight 10GE RJ45 ports for data access and line-rate switching.
Hot swapping	Supported
Service ports for stacking	The service ports on the card can be used as stack ports.

Indicators and Ports

Figure 8-71 Indicators on the ES5D21X08T00 (old)

Figure 8-72 Indicators on the ES5D21X08T00 (new)

Table 8-143 shows indicators on the ES5D21X08T00.

Table 8-143 Indicator description

No.	Indicator	Color	Description
1	STAT	Off	The system software is not running.
		Green	Fast blinking: The system is starting. Slow blinking: The system is running properly.
		Red	A fault that affects services has occurred. The fault cannot be rectified automatically and requires manual intervention.
2	ACT/LINK	Off	No link is established on the port.
2	ACT/LINK	Green	Steady on: A link has been established on the port. Blinking: The port is transmitting or receiving data.

Figure 8-73 Ports on the ES5D21X08T00 (old)

Figure 8-74 Ports on the ES5D21X08T00 (new)

1. Eight 10GBASE-T RJ45 ports

10GBASE-T RJ45 port

The ES5D21X08T00 provides eight 10GBASE-T RJ-45 electrical ports. The first four electrical ports support only 10 Gbit/s. The last four electrical ports support only 10 Gbit/s in versions earlier than V200R019C00, and also support 100 Mbit/s and 1000 Mbit/s in auto-negotiation mode in V200R019C00 and later versions. When the ports work at 10 Gbit/s, Category 6A shielded Ethernet cables are recommended. Table 8-144 lists the attributes of a 10GBASE-T RJ45 port.

Table 8-144 Attributes of a 10GBASE-T RJ45 port

Attribute	Item
Connector type	RJ45
Standards compliance	IEEE802.3an, IEEE802.3az

Table 8-145 lists the maximum transmission distances of different cables on 10GBASE-T RJ45 ports.

Table 8-145 Maximum transmission distances of different cables on 10GBASE-T RJ45 ports

Cable Type (6-a-1 Bundle)	10GBASE-T RJ45 Port
Cat6A U/UTP	Not supported
Cat6A F/UTP	100 m
Cat6A STP	100 m
Cat7	100 m

6-a-1 stands for the six-around-one cable bundle mode, with one cable in the center and six cables bundled evenly around it.

Technical Specifications

Table 8-146 lists technical specifications of the ES5D21X08T00.

Table 8-146 Technical specifications

Item	Description
Physical specifications	Dimensions (H x W x D): 40 mm x 100 mm x 208 mm (1.6 in. x 3.9 in. x 8.2 in.) Weight: 0.26 kg (0.57 lb) Maximum power consumption: 22.1 W

Ordering Information

Ordering information is subject to updates with product version upgrades. The ordering information provided in this manual is for reference only. To obtain the latest ordering information, contact Huawei switch distributors or Huawei local office.

Table 8-147 provides the ES5D21X08T00 ordering information.

Table 8-147 Ordering information

Card Description	Card Model	Part Number
8-port 10GBASE-T RJ45 rear interface card	ES5D21X08T00	98010736

Tradução

简体中文

Baixar

Updated: 2023-03-02

№ do documento: EDOC1000013597

Downloads: 39618

Average rating:

This Document Applies to these Products

Related Version

Docum. Relacionados

Digital Signature File

Digital Signature Authentication Mode