Nenhum recurso relevante encontrado no idioma selecionado.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

FusionServer Pro E9000 Server iBMC (V250 to V259) User Guide 19

Rate and give feedback:
A Huawei recorreu à tradução automática revista por uma pessoa para traduzir este documento em diferentes idiomas para que os seus utilizadores possam compreender o seu conteúdo. Nota: até mesmo a mais avançada tecnologia de tradução automática não oferece a mesma qualidade proporcionada por um tradutor profissional. A Huawei não se responsabiliza pela precisão da tradução e recomenda a consulta do documento em inglês (cujo link de acesso foi fornecido).
About This Document

About This Document

Purpose

This document describes the underlying management software Intelligent Baseboard Management Controller (iBMC) of the servers. It includes the following:

  • Functions and features of the iBMC
  • iBMC web user interface (WebUI)
  • iBMC command line interface (CLI)
  • Commands used on the iBMC
NOTE:

This document describes only the commands used to deploy and maintain Huawei servers. It does not include the following commands:

  • Commands for server manufacturing, assembling, and factory inspection and repair.
  • Commands for engineering implementation or fault locating.

Inappropriate use of these commands may result in device faults or service interruption. To obtain information about these commands, contact Huawei technical support.

This document applies to:
  • V3 compute nodes: CH121 V3, CH121L V3, CH121H V3, CH140 V3, CH140L V3, CH220 V3, CH222 V3, CH225 V3, CH226 V3, and CH242 V3 DDR4
  • V5 compute nodes: CH121 V5, CH242 V5, and CH121L V5
  • Switch modules: CX220, CX320, CX318, CX620, CX621, CX710, CX820, CX920, CX916, and CX916L

Intended Audience

This document is intended for:

  • Server installation engineers
  • Server maintenance engineers

The person who installs, manages, and troubleshoots servers must be qualified in servicing servers and trained in recognizing hazards in products with hazardous energy levels.

Symbol Conventions

The following table lists the symbols that may be found in this document.

Symbol

Description

Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results.

NOTICE is used to address practices not related to personal injury.

Calls attention to important information, best practices and tips.

NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration.

Change History

Updates between document issues are cumulative. Therefore, the latest document issue contains all updates made in previous issues.

Issue

Date

Description

19

2019-07-30

Changed the document name.

18

2019-05-30

Updated Mounting a File to the Virtual CD-ROM Drive (vmm -d connect), Querying the Serial Number of the Server (serialnumber), and Importing the Weak Password Dictionary (weakpwddic -v import).

17

2019-02-22

Updated Querying and Setting Syslog (syslog -d state).

16

2018-11-05

Updated Firmware Upgrade, Java Integrated Remote Console, and Independent Remote Console.

15

2018-08-08

14

2018-07-05

Updated Alarm Settings, and Remote Console.

13

2018-06-07

Added section Logging In to a Server Using the Independent Remote Console (Red Hat).

12

2018-05-30

Updated System and One-Click Information Collection.

11

2018-05-03

Updated Remote Console.

10

2018-03-29

Updated Power Control, Energy Saving Settings and Setting the UID Indicator Status (locate).

09

2018-02-11

Updated Table 3-38.

08

2018-01-31

07

2017-12-28

Updated Table 3-35.

06

2017-11-13

Updated the methods of installing and using the black box in Black Box.

05

2017-10-12

Updated the function description in LDAP.

04

2017-09-30

Updated the user rights description in Table 3-36.

03

2017-09-12

Updated Table 3-63.

02

2017-07-25

This issue is the second official release.

01

2017-06-30

This issue is the first official release.

Tradução
Baixar
Updated: 2019-08-01

№ do documento: EDOC1000157052

Visualizações:127777

Downloads: 255

Average rating:
This Document Applies to these Products
Docum. Relacionados
Related Version
Share
Voltar Avançar