No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Huawei V2 and V3 Server RAID Controller Card User Guide 31

This document describes the appearances and features of the redundant array of independent disks (RAID) controller cards, how to configure properties for the RAID controller cards, and how to install drivers. The RAID controller cards include the LSI SAS2208, LSI SAS2308, LSI SAS3008, LSI SAS3108, LSI SoftRAID, PM8060, and PM8068.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
About This Document

About This Document

Purpose

This document describes the appearances and features of the redundant array of independent disks (RAID) controller cards, how to configure properties for the RAID controller cards, and how to install drivers. The RAID controller cards include the LSI SAS2208, LSI SAS2308, LSI SAS3008, LSI SAS3108, LSI SoftRAID, PM8060, and PM8068.

Intended Audience

This document is intended for:

  • Enterprise administrators
  • Enterprise end users

The server maintenance personnel must have adequate knowledge about the server products and service skills to avoid injury to human body or damage to devices during maintenance.

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol

Description

Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results.

NOTICE is used to address practices not related to personal injury.

Calls attention to important information, best practices and tips.

NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration.

Change History

Changes between document issues are cumulative. The latest document issue contains all changes made in previous issues.

Issue

Date

Description

31

2019-03-20

ModifiedRAID 0, 1, 5, 6, 10, 50, and 60 and RAID 0, 1, 5, 6, 10, 50, and 60.

30

2019-01-31

Updated the document.

29

2019-01-10

Added Managing the Security Key and Managing the Security Key.

28

2018-12-30

Modified Creating RAID 10, Creating RAID 50 and Creating RAID 60.

27

2018-12-07

The description of the RAID controller card property screen of the LSI SAS3108 is optimized.

26

2018-10-30

Optimized the method of deleting the preserved cache in Legacy mode on LSI SAS3108.

25

2018-08-28

Modified the "Hard Drive Faults" section for each type of RAID controller card.

24

2018-08-21

Added the overview and configuration about LSI SAS3008IT.

23

2018-07-20

Added the description of indicators on RAID controller cards.

22

2018-06-26

Modified this document.

21

2018-05-23

Added operations for restoring hard drives to the Frn-bad state for the LSI SAS3108.

20

2018-04-20

Deleted the chapter "Environmental Specifications".

19

2018-01-25

  • Optimized the document structure.
  • Updated GUI screenshots for the LSI SAS3108 to match firmware 4.660.00-8102 or later, and added new parameters.

18

2018-01-10

Added the meaning of suffixes in RAID controller card names.

17

2017-12-22

Added MegaRAID Storage Manager description for the LSI SAS2208 and LSI SAS3108.

16

2017-10-16

Added RAID controller card features.

15

2017-08-01

Optimized the document structure.

14

2017-05-20

This issue is the fourteenth official release

13

2016-10-27

This issue is the thirteenth official release.

12

2016-03-28

Changed the commands of the LSI SAS3108.

11

2016-01-30

This issue is the eleventh official release.

10

2015-10-28

Added the PM8060 and PM8068.

09

2015-09-15

Deleted the JBOD information about LSI SAS3108.

08

2014-12-23

Added the note about authentication mechanism.

07

2014-09-18

Optimized the document structure.

06

2014-03-03

This issue is the sixth official release.

05

2013-06-30

This issue is the fifth official release.

04

2013-04-19

Added the limited number of hard drives can be configured with RAID properties for LSI SAS2308 controller card.

03

2012-08-30

Added the overview and configuration about SoftRAID.

02

2012-06-15

Added the appendix.

01

2012-04-20

This issue is the first official release.

Translation
Download
Updated: 2019-03-22

Document ID: EDOC1000004186

Views: 348397

Downloads: 19747

Average rating:
This Document Applies to these Products
Related Documents
Share
Previous Next