About This Document
Purpose
This document describes the CX911 multi-plane switch module of the E9000 server in terms of its features, installation, removal, and configuration.
The product features and commands for the 10GE switching plane of the CX911 vary according to the software version. For details, see the documents listed in the following table.
NOTE: Run the display version command in the switching plane CLI and select a reference document based on the Switch Version or Software Version displayed in the command output.
Huawei Support Website Version |
10GE Switching Plane Software Version |
Reference Document |
|---|---|---|
V100R001C00 or V100R001C00SPCxxx |
1.1.0.200.3 |
See this document. |
1.1.3.300.5 |
||
1.1.3.301.6 |
||
1.2.1.0.19 |
||
1.2.1.0.21 |
||
2.23 |
||
2.26 |
||
2.29 |
||
V100R001C10 or V100R001C10SPCxxx |
1.2.1.0.39 |
|
Versions in the x.xx format, except 2.23, 2.26, and 2.29. NOTE:
2.05 and later versions are displayed in the x.xx format. |
Intended Audience
This document is intended for:
- Technical support engineers
- Installation and commissioning engineers
- Field maintenance engineers
- System maintenance engineers
Symbol Conventions
The symbols that may be found in this document are defined as follows.
Symbol Conventions
Symbol |
Description |
|---|---|
|
Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. |
|
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. |
|
Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. |
|
Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results. NOTICE is used to address practices not related to personal injury. |
|
Calls attention to important information, best practices and tips. NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration. |
Change History
Issue |
Date |
Description |
|---|---|---|
22 |
2018-09-20 |
This issue is the twenty-second official release. |
21 |
2018-03-30 |
This issue is the twenty-first official release. |
20 |
2017-09-14 |
Deleted the contents about FCoE in Functions, Advantages, Internal Chassis Networking. |
19 |
2017-03-27 |
|
18 |
2016-08-31 |
|
17 |
2016-03-31 |
|
16 |
2015-11-09 |
Added the long-term storage temperature and humidity to Technical Specifications. |
15 |
2015-07-17 |
The reference to the throughput is added to Technical Specifications. |
14 |
2015-02-16 |
The reference to the Networking Assistant is added to Internal Chassis Networking. |
13 |
2015-01-23 |
The figure in Internal Chassis Networking is updated. |
12 |
2014-11-10 |
The Default Information is added. |
11 |
2014-09-15 |
"Tecal" is deleted from the product document. |
10 |
2014-07-30 |
The storage temperature and altitude are updated in Technical Specifications. |
09 |
2014-05-13 |
This issue is the ninth official release. |
08 |
2014-03-07 |
Configuring the FC switching plane is added. |
07 |
2014-01-01 |
|
06 |
2013-11-18 |
|
05 |
2013-09-30 |
|
04 |
2013-08-20 |
|
03 |
2013-06-05 |
|
02 |
2013-04-01 |
The numbering of the ports in the figure in Ports is modified. |
01 |
2013-01-04 |
This issue is the first official release. |
Previous
