About This Document
Purpose
This document describes the CX912 multi-plane switch module of the E9000 server in terms of its features, installation, removal, and configuration.
The product features and commands for the 10GE switching plane of the CX912 vary according to the software version. For details, see the documents listed in the following table.
NOTE: Run the display version command in the switching plane CLI and select a reference document based on the Switch Version or Software Version displayed in the command output.
Huawei Support Website Version |
10GE Switching Plane Software Version |
Reference Document |
|---|---|---|
V100R001C00 or V100R001C00SPCxxx |
1.1.0.200.3 |
See this document. |
1.1.3.100.3 |
||
1.1.3.300.5 |
||
1.1.3.301.6 |
||
1.2.1.0.19 |
||
1.2.1.0.21 |
||
2.23 |
||
2.26 |
||
2.29 |
||
V100R001C10 or V100R001C10SPCxxx |
1.2.1.0.39 |
|
Versions in the x.xx format, except 2.23, 2.26, and 2.29. NOTE:
2.05 and later versions are displayed in the x.xx format. |
Intended Audience
This document is intended for:
- Technical support personnel
- Installation and commissioning engineers
- Field maintenance engineers
- System maintenance engineers
Symbol Conventions
The symbols that may be found in this document are defined as follows.
Symbol |
Description |
|---|---|
|
Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. |
|
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. |
|
Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. |
|
Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results. NOTICE is used to address practices not related to personal injury. |
|
Calls attention to important information, best practices and tips. NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration. |
Change History
Issue |
Date |
Description |
|---|---|---|
17 |
2018-09-20 |
This issue is the seventeenth official release. |
16 |
2018-03-30 |
This issue is the sixteenth official release. |
15 |
2017-09-14 |
This issue is the fifteenth official release, and includes the following changes: Deleted the contents about FCoE in Functions, Advantages, 2.7 Internal Chassis Networking. |
14 |
2017-03-27 |
This issue is the fourteenth official release, and includes the following changes: Added product model descriptions to 2.2 Appearance. Modified the relationships between switching plane software versions and reference documents in About This Document. |
13 |
2016-11-30 |
This issue is the thirteenth official release. |
12 |
2016-08-31 |
This issue is the twelfth official release, and includes the following changes: Added the GE module to the logical structure diagram in 2.6 Logical Architecture. Modified A.12 Using the CLI to Collect FC switching plane Information. |
11 |
2016-03-31 |
This issue is the eleventh official release, and includes the following changes:
|
10 |
2015-11-09 |
This issue is the tenth official release, and includes the following changes: Added the long-term storage temperature and humidity to 2.9 Technical Specifications. |
09 |
2015-07-17 |
This issue is the ninth official release, and includes the following changes: The reference to the throughput is added to 2.9 Technical Specifications. |
08 |
2015-03-20 |
This issue is the eighth official release. |
07 |
2015-02-16 |
This issue is the seventh official release, and includes the following changes: The reference to the Networking Assistant is added to 2.7 Internal Chassis Networking. |
06 |
2015-01-23 |
This issue is the sixth official release, and includes the following changes: The figure in 2.7 Internal Chassis Networking is updated. |
05 |
2014-11-10 |
This issue is the fifth official release, and includes the following changes: The 4.2 Default Information is added. |
04 |
2014-09-15 |
This issue is the fourth official release, and includes the following changes: "Tecal" is deleted from the product document. |
03 |
2014-07-30 |
This issue is the third official release, and includes the following changes: The storage temperature and altitude are updated in 2.9 Technical Specifications. |
02 |
2014-05-13 |
This issue is the second official release. |
01 |
2014-03-07 |
This issue is the first official release. |
Previous
