About This Document
Intended Audience
This document is intended for:
- Technical support engineers
- Maintenance engineers
Symbol Conventions
The symbols that may be found in this document are defined as follows.
Symbol |
Description |
|---|---|
 |
Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. |
 |
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. |
 |
Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. |
 |
Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results. NOTICE is used to address practices not related to personal injury. |
 |
Calls attention to important information, best practices and tips. NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration. |
Change History
Changes between document issues are cumulative. The latest document issue contains all the changes in earlier issues.
Issue 09 (2018-10-30)
What's New
Renamed the inspection tool.
Issue 08 (2018-05-30)
What's New
Modified some descriptions.
Issue 07 (2016-11-10)
What's New
Optimized disk filler panel description and added PCIe free slot check description in Checking the Internal Environment of a Cabinet.
Issue 06 (2016-07-15)
What's New
Deleted information about IS5023 switches and added Checking Indicators on an SX6018 Switch and updated Routine Maintenance Record.
Issue 05 (2016-05-31)
What's New
Changed the operational pathways for inspection, information collection, and log analysis to the same as those on the Toolkit.
Issue 04 (2016-04-15)
What's New
Modified some descriptions.
Issue 03 (2015-11-23)
What's New
Modified some descriptions.
Issue 02 (2015-08-28)
What's New
Modified some descriptions.
Issue 01 (2015-06-10)
This issue is the initial release.
Previous
