About This Document
Introduction
This document describes the procedure for replacing the parts of OceanStor 2800 V3 storage system in terms of safety operations, preparations, and precautions.
This document provides the process and methods of replacing OceanStor 2800 V3 storage system parts.
Intended Audience
This document is intended for:
- Technical support engineers
- Maintenance engineers
Conventions
As part of an effort to improve and enhance the product performance and capabilities, Huawei periodically releases revisions of the hardware and software. Therefore, some functions described in this document may not be supported by all versions of the software or hardware currently in use. For the most up-to-date information about product features, refer to the product release notes.
If a product does not function as described in this document, contact Huawei technical support engineers.
Symbol Conventions
The symbols that may be found in this document are defined as follows:
Symbol |
Description |
|---|---|
|
Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. |
|
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. |
|
Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. |
|
Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results. NOTICE is used to address practices not related to personal injury. |
|
Calls attention to important information, best practices and tips. NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration. |
Change History
Changes between document issues are cumulative. The latest document issue contains all the changes made in earlier issues.
Issue 06 (2018-08-30)
This issue is the sixth official release.
Updated descriptions about how to replace interface modules.
Issue 05 (2018-05-30)
This issue is the fifth official release.
Rectified some description of replacing a controller.
Issue 04 (2017-03-27)
This issue is the fourth official release.
Added the description of Replacing a Mini SAS HD Cable.
Issue 03 (2016-11-20)
This issue is the third official release.
Added the description of how to obtain spare parts.
Issue 02 (2015-12-10)
This issue is the second official release.
Added the description of how to check the replacement.
Issue 01 (2015-08-30)
This issue is the first official release.
Previous
