About This Document
Purpose
This document describes the IP Address Failover Deployment provided by OceanStor 5300 V3/5500 V3/5600 V3/5800 V3/6800 V3 storage system in terms of working principles, planning, configuration example, and management operations.
Intended Audience
This document is intended for:
- Technical support engineers
- Maintenance engineers
Symbol Conventions
The symbols that may be found in this document are defined as follows.
Symbol |
Description |
|---|---|
 |
Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. |
 |
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. |
 |
Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. |
 |
Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results. NOTICE is used to address practices not related to personal injury. |
 |
Calls attention to important information, best practices and tips. NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration. |
Change History
Changes between document issues are cumulative. The latest document issue contains all the changes in earlier issues.
Issue 11 (2018-12-30)
This issue is the eleventh official release. The updates are as follows:
Updated descriptions in sections Configuration Process.
Issue 10 (2018-12-10)
This issue is the tenth official release. The updates are as follows:
Optimized some descriptions.
Issue 09 (2018-05-30)
This issue is the ninth official release. The updates are as follows:
Optimized some descriptions.
Issue 08 (2017-11-30)
This issue is the eighth official release. The updates are as follows:
Optimized some description in section Creating a Bond Port.
Issue 07 (2017-10-30)
This issue is the seventh official release. The updates are as follows:
Optimized some description in section Bond Port-based Configuration Example.
Issue 06 (2017-05-10)
This issue is the sixth official release. The updates are as follows:
Updated networking and descriptions in sections Ethernet Port-based IP Address Failover and Bond Port-based IP Address Failover.
Issue 05 (2016-11-20)
This issue is the fifth official release.
- Replaced float by fail over
- Optimized some description in operation steps.
Issue 04 (2016-07-25)
This is the fourth official release.
- Synchronizes some software interface changes.
- Optimizes description of principle.
Issue 03 (2016-04-30)
This is the third official release.
Synchronizes some software interface changes.
Issue 02 (2015-12-10)
This is the second official release.
Synchronizes some software interface changes.
Issue 01 (2015-08-30)
This is the first official release.
Previous
