About This Document
Introduction
This document describes the procedure for replacing the parts of OceanStor 5300 V3&5500 V3&5600 V3&5800 V3&6800 V3 storage system in terms of safety operations, preparations, and precautions.
Intended Audience
This document is intended for all audience.
Symbol Conventions
The symbols that may be found in this document are defined as follows:
Symbol |
Description |
|---|---|
|
Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. |
|
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. |
|
Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. |
|
Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results. NOTICE is used to address practices not related to personal injury. |
|
Calls attention to important information, best practices and tips. NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration. |
Change History
Changes between document issues are cumulative. The latest document issue contains all the changes made in earlier issues.
Issue 12 (2018-12-30)
This issue is the twelfth official release.
Added the method of replacing a coin battery in the section Replacing a Controller.
Issue 11 (2018-08-30)
This issue is the eleventh official release.
Updated descriptions about how to replace interface modules.
Issue 10 (2018-05-30)
This issue is the tenth official release.
Rectified some description of replacing a controller.
Issue 09 (2018-02-05)
This issue is the ninth official release.
Rectified some description of replacing a controller.
Issue 08 (2017-11-30)
This issue is the eighth official release.
Optimized the description of the 8 Gbit/s Fibre Channel Interface Module (Eight Ports).
Issue 07 (2017-07-20)
This issue is the seventh official release.
Added the procedure for removing/inserting the power cables.
Issue 06 (2017-03-27)
This issue is the sixth official release.
Added the description of Replacing a Mini SAS HD Cable.
Issue 05 (2016-11-20)
This issue is the fifth official release.
Modified the description of checking system status.
Issue 04 (2016-07-25)
This issue is the fourth official release.
Added the description of Replacing an 8 Gbit/s Fibre Channel Interface Module (Eight Ports) and Replacing an MPO-4*DLC Optical Fiber.
Issue 03 (2016-04-30)
This issue is the third official release.
Added the description of how to obtain spare parts.
Issue 02 (2015-12-10)
This issue is the second official release.
Added the description of how to check the replacement.
Issue 01 (2015-08-30)
This issue is the first official release.
Previous
