About This Document
Intended Audience
This document provides guidance for maintaining the S series switches, covering FAQs, common maintenance commands and preventive maintenance inspection guide, troubleshooting guide, typical troubleshooting cases, configuration notes, and warning.
Maintenance personnel must have the following qualifications:
- Be familiar with the current network topology and NE version information.
- Have equipment maintenance experience and be familiar with equipment maintenance methods.
Applicable Versions
This document is applicable to V200R010 and earlier versions of the S series switches.
Symbol Conventions
The symbols that may be found in this document are defined as follows.
Symbol |
Description |
|---|---|
|
Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. |
|
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. |
|
Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. |
|
Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results. NOTICE is used to address practices not related to personal injury. |
|
Calls attention to important information, best practices and tips. NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration. |
Command Conventions
The command conventions that may be found in this document are defined as follows.
Convention |
Description |
|---|---|
Boldface |
The keywords of a command line are in boldface. |
Italic |
Command arguments are in italics. |
[ ] |
Items (keywords or arguments) in brackets [ ] are optional. |
{ x | y | ... } |
Optional items are grouped in braces and separated by vertical bars. One item is selected. |
[ x | y | ... ] |
Optional items are grouped in brackets and separated by vertical bars. One item is selected or no item is selected. |
{ x | y | ... } * |
Optional items are grouped in braces and separated by vertical bars. A minimum of one item or a maximum of all items can be selected. |
[ x | y | ... ] * |
Optional items are grouped in brackets and separated by vertical bars. Several items or no item can be selected. |
&<1-n> |
The parameter before the & sign can be repeated 1 to n times. |
# |
A line starting with the # sign is comments. |
Change History
Changes between document issues are cumulative. The latest document issue contains all the changes made in earlier issues.
Issue |
Release Date |
Description |
|---|---|---|
10 |
2018-10-30 |
Tenth official release |
09 |
2018-06-30 |
Nineth official release |
08 |
2018-04-30 |
Eighth official release |
07 |
2017-06-30 |
Seventh official release |
06 |
2016-11-10 |
Sixth official release |
05 |
2016-07-30 |
Fifth official release |
04 |
2015-10-25 |
Fourth official release |
03 |
2015-05-30 |
Third official release |
02 |
2014-11-25 |
Second official release |
01 |
2014-06-30 |
Initial official release |
Previous
