About This Document
Overview
This document describes the menu structure, parameters, and common tasks of the basic input/output system (BIOS) of the KunLun 9008, 9016, and 9032 servers.
Intended Audience
This document is intended for:
- Technical support engineers
- Maintenance engineer
Symbol Conventions
The symbols that may be found in this document are defined as follows.
Symbol |
Description |
|---|---|
|
Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. |
|
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. |
|
Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. |
|
Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results. NOTICE is used to address practices not related to personal injury. |
|
Calls attention to important information, best practices and tips. NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration. |
Change History
Changes between document issues are cumulative. The latest document issue contains all the changes made in earlier issues.
Issue 09 (2018-12-26)
The issue is the ninth official release, updated the default value of Lock Flash.
Issue 08 (2018-09-25)
The issue is the eighth official release, updated the Memory RAS Configuration and Enabling Memory Mirroring.
Issue 07 (2018-06-30)
Added the iMS configuration function.
Issue 06 (2017-12-25)
Updated some BIOS screen figures and parameter descriptions in Processor Configuration.
Issue 05 (2017-09-18)
Updated some BIOS screen figures and parameter descriptions in Miscellaneous Configuration.
Issue 04 (2017-05-12)
Updated the Setting the BIOS Password and Memory Configuration sections.
Issue 03 (2017-03-08)
Updated the Memory RAS Configuration section.
Issue 02 (2016-10-29)
Added the memory board module (MBM) hot swap description.
Issue 01 (2016-01-25)
This issue is the first official release.
Previous
