No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Site Planning Guide

OceanStor 18000 V3 Series V300R006

This document is applicable to OceanStor 18500 V3 and 18800 V3. This document provides instructions for planning how to install OceanStor enterprise storage system in terms of data center or equipment room environment, power supplies, and cooling systems.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
About This Document

About This Document

Purpose

This document describes the planning before the installation of mission-critical storage systems, including the planning for the networks, installation environment, and data. The following table lists the product models to which this document applies:

Product Series

Product Model

OceanStor 18000 V3 series

OceanStor 18500 V3 and 18800 V3

OceanStor 18000F V3 series

OceanStor 18500F V3 and 18800F V3

Intended Audience

This document is intended for:

  • Technical support engineers
  • Maintenance engineers

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol

Description

Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results.

NOTICE is used to address practices not related to personal injury.

Calls attention to important information, best practices and tips.

NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration.

Change History

Changes between document issues are cumulative. The latest document issue contains all the changes made in earlier issues.

Issue 09 (2019-01-25)

This issue is the ninth official release.

Optimized some descriptions.

Issue 08 (2018-12-06)

This issue is the eighth official release.

Made some changes in specifications.

Issue 07 (2018-07-30)

This issue is the seventh official release.

Made some changes in specifications.

Issue 06 (2018-05-09)

This issue is the sixth official release.

Made some changes in specifications.

Issue 05 (2018-01-30)

This issue is the fifth official release.

Made some changes in specifications.

Issue 04 (2017-11-30)

This issue is the fourth official release.

Optimized related descriptions.

Added the Collecting Live Network Information section.

Issue 03 (2017-08-30)

This issue is the third official release.

Added introduction of high voltage DC.

Issue 02 (2017-06-01)

This issue is the second official release.

Made minor changes in specifications.

Issue 01 (2017-02-28)

This issue is the first official release.

Translation
Download
Updated: 2019-02-01

Document ID: EDOC1000138688

Views: 5889

Downloads: 37

Average rating:
This Document Applies to these Products
Related Documents
Share
Previous Next