About This Document
Purpose
This document describes the implementation principles and application scenarios of the SmartMulti-Tenant feature and explains how to configure and manage this feature.
The following table lists the product models supporting the SmartMulti-Tenant feature.
Product Series |
Product Model |
|---|---|
OceanStor 2000 V3 series |
OceanStor 2200 V3 (16 GB memory per controller) and 2600 V3 |
OceanStor 5000 V3 series |
OceanStor 5300 V3, 5500 V3, 5600 V3, and 5800 V3 |
OceanStor 6000 V3 series |
OceanStor 6800 V3 |
OceanStor 18000 V3 series |
OceanStor 18500 V3 and 18800 V3 |
Intended Audience
This document is intended for:
- Technical support engineers
- Maintenance engineers
Symbol Conventions
The symbols that may be found in this document are defined as follows.
Symbol |
Description |
|---|---|
|
Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. |
|
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. |
|
Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. |
|
Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results. NOTICE is used to address practices not related to personal injury. |
|
Calls attention to important information, best practices and tips. NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration. |
Change History
Changes between document issues are cumulative. The latest document issue contains all the changes made in earlier issues.
Issue 09 (2018-12-06)
This issue is the ninth official release. The following sections are updated:
Optimized some description.
Issue 08 (2018-07-30)
This issue is the eighth official release. The following sections are updated:
Optimized some description.
Issue 07 (2018-05-09)
This issue is the seventh official release. The following sections are updated:
Optimized some description.
Issue 06 (2018-01-30)
This issue is the sixth official release. The following sections are updated:
Optimized descriptions about section Impact and Restrictions.
Issue 05 (2017-11-30)
This issue is the fifth official release. The updates are as follows:
- Added description of a c$ share and global namespace, and updated description of a CIFS Homedir share.
- Optimized some description.
Issue 04 (2017-10-30)
This issue is the fourth official release. The updates are as follows:
- Optimized description of the capacity occupied by hot spare space.
- Updated RAID levels supported by the product, including RAID 0, RAID 1, RAID 10, RAID 3, RAID 5, RAID 6, and RAID 50.
Issue 03 (2017-08-30)
This issue is the third official release. The updates are as follows:
- Optimized descriptions about some operation steps.
- Added descriptions in (Optional) Adding a Storage System to an AD Domain.
Issue 02 (2017-06-01)
This issue is the second official release. The updates are as follows:
- Optimized some description.
- Synchronizes some software interface changes.
- Optimized descriptions about section Impact and Restrictions.
Issue 01 (2017-02-28)
This is the first official release.
Previous
