No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Huawei V2 and V3 Server RAID Controller Card User Guide 36

This document describes the appearances and features of the redundant array of independent disks (RAID) controller cards, how to configure properties for the RAID controller cards, and how to install drivers. The RAID controller cards include the LSI SAS2208, LSI SAS2308, LSI SAS3008, LSI SAS3108, LSI SoftRAID, PM8060, and PM8068.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
RAID Controller Card Fault

RAID Controller Card Fault


A RAID controller card is faulty if any of the following occurs:

  • An alarm is generated indicating a controller card fault.


  1. Replace the controller card, and check whether the alarm is cleared.

    • If yes, go to 2.
    • If no, go to 3.

    For details about how to replace a RAID controller card, see the user guide delivered with your server.

  2. Import the original RAID information, and check whether data can be written into the hard drives of the controller card.

    • If yes, no further action is required.
    • If no, go to 3.

    For details about how to import the original RAID information, see Importing Foreign Configurations.

  3. Contact Huawei technical support.
Updated: 2019-11-01

Document ID: EDOC1000004186

Views: 759355

Downloads: 20686

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next