No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Huawei V2 and V3 Server RAID Controller Card User Guide 36

This document describes the appearances and features of the redundant array of independent disks (RAID) controller cards, how to configure properties for the RAID controller cards, and how to install drivers. The RAID controller cards include the LSI SAS2208, LSI SAS2308, LSI SAS3008, LSI SAS3108, LSI SoftRAID, PM8060, and PM8068.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Deleting a Global hot spare drive

Deleting a Global hot spare drive

Scenarios

If the number of existing hard drives in the current environment is insufficient, you can delete an existing hot spare drive so that it restores to a common hard drive.

Procedure

Access the Configuration Utility main screen. For details, see Logging In to the Configuration Utility.

Enter the hot spare drive Configuration Utility.

  1. On the Controller Operations main screen, select Logical Device Configuration and press Enter.

    The Logical Device Configuration screen is displayed, as shown in Figure 10-135.

    Figure 10-135 Logical Device Configuration screen

  2. Select Global Hotspares and press Enter.

    The system prompts that the hot spare drive must have a capacity greater than that of a member drive.

  3. Press any key to continue.

    The hot spare drive operation list is displayed, as shown in Figure 10-136.

    Figure 10-136 Operation list

    Delete a hot spare drive.

  4. On the screen shown in Figure 10-136, select Delete Spares and press Enter.

    The hard drive list is displayed, as shown in Figure 10-137.

    Figure 10-137 hot spare drive list

  5. Select the hot spare drive to be deleted and press Enter.

    The status of the selected hot spare drive becomes [X].

  6. Select DELETE and press Enter.
  7. Press any key to return to the screen shown in Figure 10-136.

    Exit the Configuration Utility.

  8. Press Esc to return to the Boot Manager screen.
Translation
Download
Updated: 2019-11-01

Document ID: EDOC1000004186

Views: 707955

Downloads: 20599

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next