No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Huawei V2 and V3 Server RAID Controller Card User Guide 36

This document describes the appearances and features of the redundant array of independent disks (RAID) controller cards, how to configure properties for the RAID controller cards, and how to install drivers. The RAID controller cards include the LSI SAS2208, LSI SAS2308, LSI SAS3008, LSI SAS3108, LSI SoftRAID, PM8060, and PM8068.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Deleting a hot spare drive

Deleting a hot spare drive

Scenarios

If the number of existing hard drives in the current environment is insufficient, you can delete an existing hot spare drive so that it restores to a common hard drive.

Prerequisites

Conditions

Data

Data preparation is not required for this operation.

Procedure

Enter the hot spare drive management screen.

  1. On the displayed screen, select Array Configuration and press Enter.

    The Array Configuration screen is displayed.

    Figure 11-74 Array Configuration

  2. Select Manage Array LD.

    The RAID array list is displayed.

  3. Select the array to be operated and press Enter. The array operation list is displayed.
    Figure 11-75 Array operation list

  4. Select Manage Spare and press Enter.

    The hot spare drive operation list is displayed.

    Figure 11-76 hot spare drive operation list

    Delete a hot spare drive.

  5. On the screen shown in Figure 11-76, select Delete Spare and press Enter.

    The hot spare drive list is displayed.

  6. Select the hot spare drive to be deleted and press Enter.

    A message is displayed, indicating that the hot spare drive is successfully deleted.

  7. Repeat the preceding operations to delete more hot spare drives.

    Exit the Configuration Utility.

  8. Press Esc to return to the Boot Manager screen.
Translation
Download
Updated: 2019-11-01

Document ID: EDOC1000004186

Views: 760888

Downloads: 20695

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next