No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Huawei V2 and V3 Server RAID Controller Card User Guide 36

This document describes the appearances and features of the redundant array of independent disks (RAID) controller cards, how to configure properties for the RAID controller cards, and how to install drivers. The RAID controller cards include the LSI SAS2208, LSI SAS2308, LSI SAS3008, LSI SAS3108, LSI SoftRAID, PM8060, and PM8068.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Deleting a RAID Array

Deleting a RAID Array


Delete a RAID array to release hard drives.

A deleted RAID array cannot be restored. Exercise caution when deleting a RAID array.


  1. Access the Configuration Utility main screen. For details, see Logging In to the Configuration Utility.
  2. Delete a RAID array

    1. On the Adapter Properties screen, select RAID Properties and press Enter.

      The Select New Volume Type screen is displayed, as shown in Figure 5-47.

      Figure 5-47 Select New Volume Type screen
    2. Select View Existing Volume and press Enter.

      The View Volume screen is displayed, as shown in Figure 5-48.

      Figure 5-48 View Volume screen
    3. Select Manage Volume and press Enter.

      The Manage Volume screen is displayed.

    4. Select Delete Volume and press Enter.

      The Delete Volume screen is displayed.

      Data on the RAID array will also be deleted.

    5. Select an operation as required.
      • Press Y to delete the RAID array.

        After the RAID array is deleted, the Figure 5-10 screen is displayed.

      • Press N to quit.

        The Figure 5-68 screen is displayed.

Updated: 2019-11-01

Document ID: EDOC1000004186

Views: 817593

Downloads: 20848

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next